Instruction Manual

※ [Left Shift] + [Space] : Covert language.(English, Russian)

☞ Caution!!) [Korean] is selected : [Korean] / [English] shift

[English] is selected : [English]

[Russian] is selected : [Russian] / [English] shift

④ The use of [Function] button on the initial screen of [ARQ] mode

[ Ref. ] ☞ Message can be transmitted by [Function] button on the [ARQ] mode

initial screen.

※ Press the function button Press [Enter] button to transmit.

※ Select the function with material  Press [Enter] button to transmit.

⚫ [F1] : [1WHU]- Demand Answer back code of the other station.

⚫ [F2] : [2Hereis] – Transmit Answer back code of yourself.

⚫ [F3] : [3TMS] – Transmit the present time.

⚫ [F4] : [4F.send] – Transmit the file written in edit mode.( Refer to ‘14-4-4 TX of file )

⚫ [F5] : [5Macro] – You can use the sentence no. Written in Macro Command.

( Refer to ‘14-4-5 Macro Command RX )

⚫ [F7] : [7Over] – Convert the direction of transmitting the message.

⚫ [F8] : [8Stop] – Stop communication.

⚫ [F9] : [9VOL-] – Volume can be reduced.

⚫

[F10] : [0VOL+] – Volume can be increased.

11-4-4 TRANSMITTING FILE

※ After performing `14-4-1’ or ‘14-4-2’, operate the unit as below order.

① Press Function button [F4] Move the cursor to the file you want using

[]/[] button Press [Enter] button

③ The file will be transmitted showing the full contents on the screen.

[ Ref. ] ☞ Pressing [F8] button is able to stop transmitting.

11-4-5 TRANSMITTING MACRO COMMAND

※ After performing `14-4-1’ or ‘14-4-2’, operate the unit as below order.

① Press Function button [F5] Move the cursor to the sentence no. to be transmitted

using []/[] button Press [Enter] button.

② The sentence will be transmitted showing the command contents on the screen.

[ Ref. ] ☞ pressing [F8] button is able to stop transmitting.

11-5 [FEC] MODE