Instruction Manual

69
8-3-2 RECEIVING A TEST CALL
1) Set up an auto response
It is possible to set the function to respond automatically when TEST call is received.
➜ ➜ [1.DSC SETUP] ➜ [4.AUTO ACK SET]
➜ You can turn it ON in [1.AUTO ACK TEST : ON] ON.
※ When AUTO ACK is ON, when receiving TEST call alarm doesn’t sound and alarm
window doesn’t appear on the screen. Also, the TEST DSC receiving screen is not
displayed.
2) Send a manual response
① There is only [ACK] when sending a manual response.
[ACK] – Answer the TEST call.
Press to send a response call to the received DSC frequency.
8-4 POSITION CALL