Instruction Manual

36
[ Ref. ] In [AM] mode TX frequency cannot be displayed (only RX) and AGC is set
automatically.
5-3-4 DSC MODE
➜ ➜ ➜ If you press , the following
screen appears.
If you turn with the front channel dial, press , put on RX and press , choose
frequency , , to which you going to change and change the
frequency from 10Hz to 10MHz with the dial.
[ Ref. ] CH1 to CH32 have no frequency change, and applies CH33 ~ CH40.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press to switch to another mode.