Instruction Manual

35
If you turn with the front channel dial, it will be converted into 100Hz unit. Press ,
put on RX and press , choose frequency , , to which you
going to change and change the frequency from 10Hz to 10MHz with the dial.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press to switch to another mode.
[ Ref. ] In [RCV] mode TX frequency cannot be displayed.
5-3-3 AM MODE
➜ ➜ If you press the following screen
appears.
If you turn with the front channel dial, press , put on RX and press , choose
frequency , , to which you going to change and change the
frequency from 10Hz to 10MHz with the dial.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press to switch to another mode.