Instruction Manual

5-2-3 SCAN FREQUENCY SET

➜ : Set the setting value in case of scanning frequency.

Choose the [3. Scan Frequency Set] ➜ The following screen

appears.

, Move to the relevant function ➜ setting ➜

[Numeric buttons] Enter the relevant values ➜

[Start]: Set the start frequency of the frequency scan. (1,605.0~27,499.9KHz)

[End]: Set the last frequency of the frequency scan. (1,605.0~27,499.9KHz)

[Speed]: Set the speed of the scan. (1 to 15, 1: fastest, 15: slowest)

[Step]: Set the scan interval. (0.1~9.9KHz)

Press to return to the main screen.

5-2-4 SQL TYPE SET

[ Ref. ] ☞ It is a function to remove the unique sound of SSB that occurs during

reception. If it set high, it may not receive weak reception signal.

➜ If you press , the following screen appears.

1. SQL Sense: This is menu, which sets the SQL sensitivity setting value.

Setting range: 1 to 10, (1: low sensitivity, 10: high sensitivity)