Instruction Manual

ⓐ SPK : ➜ ➜ [4.SYSTEM SETUP]➜

➜ [4.SPEAKER : ON] ➜ Press to turn ON/OFF.

If ON: SPK displays, If OFF : SPK delates

ⓑ BEEP : ➜ ➜ [4.SYSTEM SETUP] ➜

➜ [5.KEY TONE : ON] ➜ Press to turn ON/OFF.

If ON : There is a "beep" sound during keyboard operation.

If OFF : There is no "beep" sound during keyboard operation.

HIGH : SRG-150DN (J3E:150W, FIB:100W)

SRG-250DN (J3E:250W, FIB:150W)

MID : SRG-150DN/250DN (J3E:100W, F1B:100W)

LOW : SRG-150DN/250DN (J3E:50W, F1B:75W)

ⓓ SCAN : ➜ ➜ (4.Scan Start) ➜ Press

to activate SCAN.

Press to stop SCAN.

ⓔ AMP : ➜ When AMP is ON Press

again to turn off AMP.

ⓕ MMSID : ➜ ➜ [1.DSC SETUP] ➜

➜ ➜ Enter the MMSI ID to display the Maritime Mobile

Service Identity (MMSI) ID.

ⓖ CH : Display the channel

ⓗ TX : Display the transmitted frequency

ⓘ RX : Display the received frequency

ⓙ : GPS reception data (top, longitude) is displayed.

"MAN" is displayed when manually inputting

coordinates, and "GPS" is displayed when data is input

directly from GPS receiver.

ⓚ : Displays the W / K frequency (6 channels) being scanned.

ⓛ AGC-OFF : Adjust the characteristics of automatic sensitivity.

➜ Press keys to change to AGC-OFF, AGC-1, AGC-2, and

AGC-3.