Instruction Manual

CFEC (Collective Forward ERROR Correction)

SFEC (Selective Forward ERROR Correction)

4) Status Display: POWER ON, STAND-BY, CALLED, CALLING, FREE, SIGNAL, ARQ, CFEC,

SFEC, SEND, RECEIVER, PHASING, REPHASING, REPEAT, ERR, etc.

5) Code: 7 units CODE 4B / 3Y (B: 1785 Hz, Y: 1615 Hz)

6) Memory capacity: 16M

7) SYSTEM PARAMETER: PROGRAMING OPERATOR DATA TO FLASH DISK AND keeping as

BACK UP.

8) Center frequency: 1700Hz

9) Frequency SHIFT Width: ±85Hz

10) Modulation speed: 100BAUD (ARQ, FEC MODE)

11) Modulation: phase continuous AFSK

12) Frequency deviation: within 0.5Hz

13) Compass safety distance

- Follow compass safety distance to prevent interference with your magnetic compass.

- Standard Compass: 2.4 m

- Steering Compass: 1.5m

14) Demodulation input: 0dBm, 600ohm unbalanced / balanced

15) Modulation output: 0dBm, 600ohm unbalanced / balanced

3-8 PRINTER (HP-283)

1) Printer specifications

⁃ Printing method: Direct Thermal

⁃ Printing speed (best): 200mm/sec

⁃ Resolution (DPI): 180 DPI (7dot/mm)

⁃ Printing area (Number of dots a line): 512 Dots/Line

⁃ Interval between letters: 1 DOT

⁃ External standard: 143mm(W) × 194mm(D) × 136mm(H)

⁃ Body weight: about 0.58Kg

⁃ Working voltage: DC +24V ±10%

2) Operating condition

⁃ Temperature range: -25℃ ～ 40℃

⁃ Humidity range: 40％～ 90％ RH

3) Thermal paper specifications