Datasheet

使用指南 Application Guidelines
- 11 -
Index
電路板設計 Circuit Board Design
盡量避免清潔電路板，如果要進行電路板清潔，應使用標准電路板清潔液通過無靜電或超音波浸漬
方法進行清潔，時間不超過5分鐘，最高溫度不高於+60˚C。之后要徹底沖洗和風干。一般來說，應
將EDLC如同鋁電解電容器一樣對待。
Cleaning of the circuit board should be avoided. If the circuit board must be cleaned use static or ultrasonic
immersion in a standard circuit board cleaning fluid for no more than 5 minutes and a maximum temperature
of +60˚C. Afterwards thoroughly rinse and dry the circuit boards. In general, treat EDLC in the same manner
you would an aluminum electrolytic capacitor.
長期貯存 Long Term Storage
不要在以下環境中貯存EDLC：
• 高溫/高溼度下貯存
• 直接與水，鹽水，油或其它化學品接觸
• 直接與腐蝕性材料，酸，碱金屬或有毒氣體接觸
• 陽光直射
• 粉塵環境
• 沖擊和/或振動環境
Do not store EDLC in any of the following environments:
• High temperature and/or high humidity
• Direct contact with water, salt water, oil or other chemicals
• Direct contact with corrosive materials, acids, alkalis or toxic gases
• Direct exposure to sunlight
• Dusty environment
• Environment subject to excessive shock and/or vibration
運輸信息 Transportation Information
EDLC的國際運輸受到US DOT (運輸部)/IATA規定，正確的國際運輸產品編碼 UN3499 CAPACITOR, electric
double layer. 詳情可參照以下國際運輸規定：
EDLC are regulated by the US DOT/IATA transportation regulations. Proper shipping name for EDLCs is
UN3499 CAPACITOR, electric double layer. These transportation regulations, include:
• the 2013 – 2014 ICAO Technical Instructions on the Safe Transport of Dangerous Goods by Air (54th edition
of the International Air Transport Association Dangerous Goods Regulations);
• the International Maritime Dangerous Goods Code incorporating amendment 36-12;
• the European road and rail regulations (the ADR and RID); and
• the US Hazardous Materials Regulations in Title 49 of the Code of Federal Regulations (Parts 171 to 180).