Programming Guide

CHUMP Reference Guide
40
Wd
Name
Write DSFID
Description
This is a protocol specific tag command that writes the DSFID. If
the “d:” sequence is not sent, the tag must first be selected.
Type
Tag command with reply
Format
}Wd,b:<blk data>[,d:<tag id>][,l:];
<FCS><CRLF>
}Wd,b:<blk data>[,l:] !<CRLF>
where:
a:<blk addr> is the block address (0 by default).
b: <blk data> is the block data.
l:<# blks> is the number of blocks (1 by default).
Return Message
{A[,e:xx]*;<FCS><CRLF>