Z-99Q-1 5/13/03 13:48 Page 1-2 In case the need for Servicing arises Don't hesitate to call any nearby AS center with your name, address and telephone number when anything wrong with your product occurs. ELECTRONICS AH68-10332H Downloaded From Disc-Player.
Z-99Q-1 5/13/03 13:48 Page 1-3 OWNER'S INSTRUCTIONS Z-99Q VIDEO-CD CD PLAYER Before operating the unit, please read this manual thoroughly, and retain for future reference.
Z-99Q-1 5/13/03 13:48 Page 2 SAFETYPRECAUTIONS SAFETY PRECAUCAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE TOP COVER, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation.
Z-99Q-1 5/13/03 13:48 Page 3 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Do not damage the power cord. Damage to the power cord may cause a fire or shock hazard. • When unplugging the power cord, please hold by the plug and remove it carefully in standby mode. • When you finish operating the unit, always turn off the power. Leaving a disc loaded for a long time with power turned on may damage the disc. • When you insert the disc, please do not insert over another disc.
Z-99Q-1 5/13/03 13:48 Page 4 SAFETY INSTRUCTIONS READ INSTRUCTIONS • All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS • The safety and operating instructions should be retained for future reference. HEED WARNINGS • All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS • All operating and use instructions should be followed.
Z-99Q-1 5/13/03 13:48 Page 5 OUTDOOR ANTENNA GROUNDING • If an outside antenna is connected to the antenna terminal, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. • In the U.S.A section 810 of the National Electrical Code, ANSI/NFPA No.
Z-99Q-1 5/13/03 13:48 Page 6 CONTROLS AND COMPONENTS FRONT PANEL 2 3 1 1 2 3 4 5 6 7 8 9 +10/0 DISC CHANGE 4 5 SELECT RETURN PREVIOUS NEXT OPEN/CLOSE 6 7 8 POWER 9 10 11 ON/STANDBY REPEAT 16 SOUND LOW VOLUME MIN KEY CONTROL MIC 1 1. DIGIT buttons MIC 2 MAX 15 14 3D LAST MEMORY HIGH DIGITAL ECHO MIN MAX 13 9. LAST MEMORY button 2. DISC CHANGE button 10. 3D button 3. PREVIOUS/NEXT buttons 11. KEY CONTROL buttons 4. SELECT(PLAY/PAUSE) button 12.
Z-99Q-1 5/13/03 13:48 Page 7 CONTROLS AND COMPONENTS REAR PANEL 1 2 RF OUTPUT (TO TV) R VIDEO OUT 3 L AUDIO OUT 1 AMP R L TV AUDIO OUT 2 CHANNEL ADJUST 1. VIDEO OUTPUT - Connect to the VIDEO IN of your TV set. 2. AUDIO OUTPUT (AMP) - Connect to the AUDIO IN of your STEREO AMPLIFIER. 3. AUDIO OUTPUT (TV) - Connect to the AUDIO IN of your TV set.
Z-99Q-1 5/13/03 13:48 Page 8 REMOTE CONTROL 1. POWER button Power 1 2. DIGIT buttons 2 1 2 3. PROGRAM button 3 4 5 6 7 8 9 +10/0 4. SOUND SELECTOR button 5. DISC CHANGE button 6. SELECT(PLAY / PAUSE) button 3 4 PROGRAM SOUND REPEAT SLOW PAL/NTSC DISC CHANGE 8 9 7. STOP button 10 9. SLOW button DISC VIEW 5 ZOOM 6 11 SELECT PREV TIME SEARCH NEXT 8. REPEAT/PAL/NTSC button 10. DISC VIEW/ZOOM button 11. TIME SEARCH(LAST MEMORY) button 12.
Z-99Q-1 5/13/03 13:48 Page 9 SYSTEM CONNECTIONS VCD AND CDP + TV 1. Connect AUDIO OUT2 jack of the VCD and CDP to AUDIO IN jack of the TV. 2. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. SET REAR R VIDEO OUT L AMP AUDIO OUT 1 R L TV AUDIO OUT 2 AUDIO CABLE VIDEO CABLE TO AUDIO IN TO VIDEO IN TV VCD AND CDP + TV + AMPLIFIER 1. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. 2.
Z-99Q-1 5/13/03 13:48 Page 10 VIDEO-CD PLAYBACK HOW TO PLAYBACK VIDEO-CD version 2.0 • Turn on the POWER button. 1 Press the OPEN/CLOSE button. • The tray is ejected. 2 Insert a VIDEO-CD disc and press the OPEN/CLOSE button. • Press the DISC CHANGE button for tray No selection. 4 Press the SELECT (PLAY/PAUSE) button. • In version 1.1 disc menu is not displayed and TO RETURN TO THE PREVIOUS MENU Press the RETURN button.
Z-99Q-1 5/13/03 13:48 Page 11 SLOW MOTION SELECT SOUND TO YOUR PREFERENCE Press the SLOW button on the remote control when the play function is on. PREPARATION -Voices do not come out when the SLOW MOTION button is pressed SLOW -Slow playing is 1/2 of the normal playing speed at 1st press. -Slow playing is 1/4 of the normal playing speed at 2nd press. -Slow playing is 1/8 of the normal playing speed at 3rd press. -Slow playing is canceled at 4th press. -The sound is muted during the slow playing. 1.
Z-99Q-2 5/13/03 13:49 Page 12 DISC VIEW FUNCTION • Desired music or video display can be used directly without by menu functions (VER 2.0 Mode). This function is possible in Ver 1.1 and Ver 2.0 menu off mode. TRACK VIEW • This function is used for show the first views by nine in track. ex) VCD 1.1 Version 1 4 Press the SELECT(PLAY/PAUSE) button. • Displayed in full screen. Press the DISC VIEW button. • DISC VIEW MENU is displayed.
Z-99Q-2 5/13/03 13:49 Page 13 REPEAT FUNCTION • Turn on the TV. • Load and play a disc. 1.TO REPEAT ONE TRACK INDEX VIEW Press the REPEAT button. • This function acts as displaying the track in playing sequently by time and so it's convenient for searching desired video. ex) VCD 1.1 Version 1 • "REPEAT" indicating the one track repeat lights and the one track is played repeatedly. REPEAT PAL/NTSC 2.TO REPEAT ONE DISC Press the PLAY button to playback. Press the REPEAT button again.
Z-99Q-2 5/13/03 13:49 Page 14 PROGRAM FUNCTION • This function can program up to 30 tracks during STOP mode. ex) To program No.4 track of No.2 disc 1 Press the PROGRAM button. PROGRAM 4 PROGRAM P : 01 1 - 00 In a second • After step 3, you must press the PROGRAM button again then the selected number (2-04) is programed. • Up to 30 tracks can be programmed by repeating step 2 to 4. PROGRAM PROGRAM 02 1 - 00 PROGRAM 2 Select the disc by pressing the DISC CHANGE button.
Z-99Q-2 5/13/03 13:49 Page 15 ZOOM FUNCTION • This function works only in the VCD play mode. 1 Press the DISC VIEW/ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM. DISC VIEW ZOOM 2 While in the 2 x ZOOM screen, press the DISC VIEW/ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM. DISC VIEW ZOOM 3 While in the stage of No.1 or No.2 above, press the , , , key to scroll the screen to the left, right, up, or down.
Z-99Q-2 5/13/03 13:49 Page 16 SEARCHING FUNCTIONS • Turn on the TV. • Load and play the disc. NOTE HIGH SPEED SEARCH • This function is used to searching disc for desired location. Press and hold down the Search button during the play. • Hold down the PREV./NEXT button on the front panel more In case of high speed search • When searching a CD disc, the volume is lowered and it advances in high speed.
Z-99Q-2 5/13/03 13:49 Page 17 TIME SEARCH 1 LAST MEMORY FUNCTION -If you press the STOP or POWER button during VIDEO-CD playback, a playback position slightly ahead of the current time is stored in the unit's memory. -You can easily find the memorized position just press the TIME SEARCH button. Press the TIME button. Time 01 02 : 23 00 : 00 TIME SEARCH METHOD 2 Enter the time by pressing the DIGIT button.
Z-99Q-2 5/13/03 13:49 Page 18 KARAOKE FUNCTION • Turn on the TV. • Load and play a disc. 1 Connect the MIC. • The key control will be displayed on the screen. KEY CONTROL FUNCTION • Make sure to be at the karaoke mode. Press the Key Control button • Press the KEY CONTROL button to adjust the key to KEY # suit to your voice. (the 25 step key control) KEY # 2 Load a disc and select a desired track. • Eject the tray by pressing the OPEN/CLOSE button, load a disc and close the tray.
Z-99Q-2 5/13/03 13:49 Page 19 Adjust the DIGITAL ECHO. - This will add an echo to your voice, giving you the feeling of singing on stage, Adjust it as desired. To decrease or increase the volume of the Microphone: • Turning to the left decreases Volume. Turning to the right increases Volume. DIGITAL ECHO To decrease echo effect VOLUME To increase echo effect MIN MAX (SET) MIN MAX (SET) If howling occurs: -Reduce the microphone volume. -Change the direction that the microphone faces.
Z-99Q-2 5/13/03 13:49 Page 20 TROUBLE SHOOTING SYMPTOM CHECK AND ACTION Tray is not ejected. –Check if the power is turned on. The unit does not play Tray is ejected. –Check if a disc is loaded. –Check if a disc is contaminated or damaged. Remove disc, clean it and insert again. –Check if a disc is seated properly. Video or audio is muted, or tray is ejected after 2-5 seconds. –Check for condensation in unit. –Removed disc, leave the unit with the power turned on for 1-2 hours.
Z-99Q-2 5/13/03 13:49 Page 21 WHEN VIDEO IS DISPLAYED THROUGH SET -Source : VIDEO-CD DISC -Display :TV monitor CARE OF PLAYER AND DISCS CARE OF DISCS Use a soft, dry cloth for cleaning.
Z-99Q-2 5/13/03 13:49 Page 22 CARE OF PLAYER AND DISCS SPECIFICATIONS Cleaning the Player GENERAL –Power consumption: 8W - Use soft cloth or the dusting attachment of your vacuum cleaner to dust the exposed surface of the player. Use the vacuum cleaner attachment to remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. SPECIFICATIONS –Weight: 3.
Z-99Q-1 5/13/03 13:48 Page 13 Downloaded From Disc-Player.
