Z-48Q-1 5/13/03 13:44 Page 1-2 In case the need for Servicing arises Don't hesitate to call any nearby AS center with your name, address and telephone number when anything wrong with your product occurs.
Z-48Q-1 5/13/03 13:44 Page 1-3 OWNER'S INSTRUCTIONS Z-48Q VIDEO-CD CD PLAYER Before operating the unit, please read this manual thoroughly, and retain for future reference.
Z-48Q-1 5/13/03 13:44 Page 2 SAFETYPRECAUTIONS SAFETY PRECAUCAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE TOP COVER, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation.
Z-48Q-1 5/13/03 13:44 Page 3 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Do not damage the power cord. Damage to the power cord may cause a fire or shock hazard. • When unplugging the power cord, please hold by the plug and remove it carefully in standby mode. • When you finish operating the unit, always turn off the • • power. Leaving a disc loaded for a long time with power turned on may damage the disc. When you insert the disc, please do not insert over another disc.
Z-48Q-1 5/13/03 13:44 Page 4 SAFETY INSTRUCTIONS READ INSTRUCTIONS • All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS • The safety and operating instructions should be retained for future reference. HEED WARNINGS • All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS • All operating and use instructions should be followed.
Z-48Q-1 5/13/03 13:44 Page 5 OUTDOOR ANTENNA GROUNDING • If an outside antenna is connected to the antenna terminal, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. • In the U.S.A section 810 of the National Electrical Code, ANSI/NFPA No.
Z-48Q-1 5/13/03 13:44 Page 6 CONTROLS AND COMPONENTS FRONT PANEL 1 2 3 1 2 3 4 5 SELECT RETURN 6 7 8 9 +10/0 PREVIOUS NEXT 4 5 OPEN/CLOSE POWER ON/STANDBY LOW VOLUME MIN 11 MIC 2 MAX 8 HIGH DIGITAL ECHO MIN 7 MAX 6 1. DIGIT buttons 7. MIC jacks 2. SELECT(PLAY/PAUSE) button 8. MIC VOLUME knob 3. RETURN(STOP) button 9. KEY CONTROL buttons 4. OPEN/CLOSE button 10. PREVIOUS/NEXT(SKIP/SEARCH) buttons 5. POWER button 11. DISC TRAY 6.
Z-48Q-1 5/13/03 13:44 Page 7 CONTROLS AND COMPONENTS REAR PANEL 1 2 R 3 L R L AMP VIDEO OUT 1. VIDEO OUTPUT -Connect to the VIDEO IN of your TV set. AUDIO OUT 1 TV AUDIO OUT 2 3. AUDIO OUTPUT (TV) -Connect to the AUDIO IN of your TV set. 2. AUDIO OUTPUT (AMP) - Connect to the AUDIO IN of your STEREO AMPLIFIER.
Z-48Q-1 5/13/03 13:44 Page 8 REMOTE CONTROL 1. POWER button POWER 1 2. DIGIT buttons 2 1 2 3 4 3. PROGRAM button 4. SOUND SELECTOR button 3 4 5 6 7 8 9 +10/0 REPEAT SLOW 5. AI SLEEP button PROGRAM SOUND PAL/NTSC AI SLEEP 6. SELECT(PLAY / PAUSE) button 8 9 10 ZOOM 6 11 SELECT PREV TIME SEARCH 8. REPEAT/PAL/NTSC button 9. SLOW button DISC VIEW 5 7. STOP button 10. DISC VIEW/ZOOM button 11. TIME SEARCH(LAST MEMORY) button 12.
Z-48Q-1 5/13/03 13:44 Page 9 SYSTEM CONNECTIONS VCD AND CDP + TV 1. Connect AUDIO OUT jack of the VCD and CDP to AUDIO IN jack of the TV. 2. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. SET REAR R L R L AMP VIDEO OUT TV AUDIO OUT 1 AUDIO OUT 2 VIDEO CABLE AUDIO CABLE TO VIDEO IN TO AUDIO IN TV VCD AND CDP + TV + AMPLIFIER 1. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. 2.
Z-48Q-1 5/13/03 13:44 Page 10 VIDEO-CD PLAYBACK HOW TO PLAYBACK VIDEO-CD version 2.0 • Turn on the POWER button. 1 Press the OPEN/CLOSE button. • The tray is ejected. 2 Insert a VIDEO-CD disc and press the OPEN/CLOSE button. 5 Select a number from the menu and press it. Ex) When selecting No. 4 A woman's day. 4 OPEN/CLOSE OPEN/CLOSE TO RETURN TO THE PREVIOUS MENU Press the RETURN button.
Z-48Q-1 5/13/03 13:44 Page 11 SLOW MOTION SELECT SOUND TO YOUR PREFERENCE Press the SLOW button on the remote control when the play function is on PREPARATION -Voices do not come out when the SLOW MOTION button is pressed SLOW -Slow playing is 1/2 of the normal playing speed at 1st press. -Slow playing is 1/4 of the normal playing speed at 2nd press. -Slow playing is 1/8 of the normal playing speed at 3rd press. -Slow playing is canceled at 4th press. -The sound is muted during the slow playing. 1.
Z-48Q-2 5/13/03 13:42 Page 12 DISC VIEW FUNCTION • Desired music or video display can be used directly without by menu functions (VER 2.0 Mode). This function is possible in Ver 1.1 and Ver 2.0 menu off mode. TRACK VIEW 4 • This function is performed in the STOP mode. 1 Press the SELECT(PLAY/PAUSE) button. • Displayed in full screen. Press the DISC VIEW button. • DISC VIEW MENU is displayed.
Z-48Q-2 5/13/03 13:42 Page 13 REPEAT FUNCTION • Turn on the TV. • Load and play a disc. INDEX VIEW 1.TO REPEAT ONE TRACK • This function acts as displaying the track in playing sequently by time and so it's convenient for searching desired video. Press the REPEAT button. • "REPEAT" indicating the one track repeat lights and the one track is played repeatedly. 1 REPEAT PAL/NTSC Press the PLAY button to playback. 2.TO REPEAT ONE DISC SELECT Press the REPEAT button again.
Z-48Q-2 5/13/03 13:42 Page 14 PROGRAM FUNCTION • This function can program up to 30 tracks during STOP mode. ex) To program No.4 track of No.2 disc 1 Press the PROGRAM button. 4 PROGRAM P : 01 00 PROGRAM Press the PLAY/PAUSE button. • Programming is completed, and the first track of the program is played. • When the PREVIOUS/NEXT button is pressed, the next or previous programmed track is played. PROGRAM 2 SELECT Press the track number to be programmed. • Press the digit buttons.
Z-48Q-2 5/13/03 13:42 Page 15 ZOOM FUNCTION • This function works only in the VCD play mode. 1 Press the DISC VIEW/ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM. DISC VIEW ZOOM 2 While in the 2 x ZOOM screen, press the DISC VIEW/ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM. DISC VIEW ZOOM 3 While in the stage of No.1 or No.2 above, press the , , , key to scroll the screen to the left, right, up,or down.
Z-48Q-2 5/13/03 13:42 Page 16 SEARCHING FUNCTIONS • • Turn on the TV. Load and play the disc. HIGH SPEED SEARCH NOTE • This function is used to searching disc for desired location. In case of high speed search Press and hold down the Search button during the play. • When searching a CD disc, the volume is lowered and it advances in high speed. • Hold down the PREV./NEXT button on the front panel more than one second.
Z-48Q-2 5/13/03 13:42 Page 17 TIME SEARCH 1 LAST MEMORY FUNCTION -If you press the STOP or POWER button during VIDEO-CD playback, a playback position slightly ahead of the current time is stored in the unit's memory. -You can easily find the memorized position just press the TIME SEARCH button. Press the TIME button. Time 01 02 : 23 00 : 00 TIME SEARCH METHOD 2 Enter the time by pressing the DIGIT button.
Z-48Q-2 5/13/03 13:42 Page 18 KARAOKE FUNCTION • Turn on the TV. • Load and play a disc. 1 Connect the MIC. • The key control will be displayed on the screen. KEY CONTROL FUNCTION • Make sure to be at the karaoke mode. Press the Key Control button KEY # • Press the KEY CONTROL button to adjust the key to suit to your voice. (the 25 step key control) KEY # 2 Load a disc and select a desired track. • Eject the tray by pressing the OPEN/CLOSE button, load a disc and close the tray.
Z-48Q-2 5/13/03 13:42 Page 19 Adjust the DIGITAL ECHO. - This will add an echo to your voice, giving you the feeling of singing on stage, Adjust it as desired. To decrease or increase the volume of the Microphone: • Turning to the left decreases Volume. Turning to the right increases Volume. DIGITAL ECHO To decrease echo effect VOLUME To increase echo effect MIN MAX (SET) MIN MAX (SET) If howling occurs: -Reduce the microphone volume. - Change the direction that the microphone faces.
Z-48Q-2 5/13/03 13:42 Page 20 TROUBLE SHOOTING SYMPTOM CHECK AND ACTION Tray is not ejected. –Check if the power is turned on. The unit does not play Tray is ejected. –Check if a disc is loaded. –Check if a disc is contaminated or damaged. Remove disc, clean it and insert again. –Check if a disc is seated properly. Video or audio is muted, or tray is ejected after 2-5 seconds. –Check for condensation in unit. –Removed disc, leave the unit with the power turned on for 1-2 hours.
Z-48Q-2 5/13/03 13:42 Page 21 WHEN VIDEO IS DISPLAYED THROUGH SET -Source : VIDEO-CD DISC -Display :TV monitor CARE OF PLAYER AND DISCS CARE OF DISCS Use a soft, dry cloth for cleaning. Clean the disc with water diluted with neutral detergent solution and wipe from inside to outside using dry cloth. * Color or sync is in trouble according to TV set. GENERAL INFORMATION ABOUT THE DISC GENERAL INFORMATION ABOUT THE DISC Compact Disc 8cm (3 inch) Digital Audio (Max. 20 min.
Z-48Q-2 5/13/03 13:42 Page 22 CARE OF PLAYER AND DISCS Cleaning the Player - Use soft cloth or the dusting attachment of your vacuum cleaner to dust the exposed surface of the player. Use the vacuum cleaner attachment to remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. - Some of plastic surfaces are easily scratched, and they can be marred by alcohol and various solvents.
Z-48Q-1 5/13/03 13:44 Page 13
