Z-300M/30M 5/12/03 10:29 Page 1-2 In case the need for Servicing arises Don't hesitate to call any nearby AS center with your name, address and telephone number when anything wrong with your product occurs. ELECTRONICS AH68-00584B Downloaded From DvDPlayer-Manual.
Z-300M/30M 5/12/03 10:29 Page 1-3 OWNER'S INSTRUCTIONS Z-300M/Z-30M Z-300Me/Z-30Me VIDEO-CD/CD/MP3 DISC PLAYER Before operating the unit, please read this manual thoroughly, and retain for future reference. Power Disc Change Key Control Repeat Open/Close POWER 1 2 Sound Select 3 4 7 8 5 9 PROGRAM SOUND Return 6 +10/0 REPEAT SLOW PAL/NTSC DISC CHANGE DISC VIEW ZOOM Next Previous SELECT PREV Mic1 Mic2 MicVol.
Z-300M/30M 5/12/03 10:29 Page 2 SAFETYPRECAUTIONS SAFETY PRECAUCAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE TOP COVER, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation.
Z-300M/30M 5/12/03 10:29 Page 3 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Do not damage the power cord. Damage to the power cord may cause a fire or shock hazard. • When unplugging the power cord, please hold by the plug and remove it carefully in standby mode. • When you finish operating the unit, always turn off the power. Leaving a disc loaded for a long time with power turned on may damage the disc. • When you insert the disc, please do not insert over another disc.
Z-300M/30M 5/12/03 10:29 Page 4 SAFETY INSTRUCTIONS READ INSTRUCTIONS • All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS • The safety and operating instructions should be retained for future reference. HEED WARNINGS • All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS • All operating and use instructions should be followed.
Z-300M/30M 5/12/03 10:29 Page 5 OUTDOOR ANTENNA GROUNDING • If an outside antenna is connected to the antenna terminal, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. • In the U.S.A section 810 of the National Electrical Code, ANSI/NFPA No.
Z-300M/30M 5/12/03 10:29 Page 6 CONTROLS AND COMPONENTS FRONT PANEL 1 2 3 4 5 Disc Change Key Control Repeat Sound 6 Power Open/Close Select Mic2 MicVol. MIN 10 11 12 MAX Digital Echo MIN 8. Return(Stop) button 2. Key Control button 9. Previous/Next buttons 3. Key Control button 10. Disc Tray 4. Repeat button 11. Open/Close button 5. Sound button 12. Mic jacks 6. Power button 13. Mic Volume knob 7. Select(Play/Pause) button 14.
Z-300M/30M 5/12/03 10:29 Page 7 CONTROLS AND COMPONENTS REAR PANEL 1 RF OUTPUT (TO TV) 2 R VIDEO OUT 3 L AUDIO OUT 1 AMP R L TV AUDIO OUT 2 CHANNEL ADJUST 1. VIDEO OUTPUT - Connect to the VIDEO IN of your TV set. 2. AUDIO OUTPUT (AMP) - Connect to the AUDIO IN of your STEREO AMPLIFIER. 3. AUDIO OUTPUT (TV) - Connect to the AUDIO IN of your TV set. ACCESSORIES REMOTE CONTROL VIDEO CABLE AUDIO CABLE OWNER'S INSTRUCTIONS 7 Downloaded From DvDPlayer-Manual.
Z-300M/30M 5/12/03 10:29 Page 8 REMOTE CONTROL 1. POWER button 2. DIGIT buttons 3. PROGRAM button 4. SOUND SELECTOR button 5. DISC CHANGE button 6. SELECT(PLAY / PAUSE) button 7. STOP (RETURN) button 8. REPEAT/PAL/NTSC button 9. SLOW button 10. DISC VIEW/ZOOM button 11. TIME SEARCH(LAST MEMORY) button 12. PREVIOUS / NEXT(SKIP) button TO INSERT BATTERIES the battery 1 Open compartment cover. two "AAA" batteries Replace the cover. 2 Install observing the correct polarity 3 as shown in compartment.
Z-300M/30M 5/12/03 10:29 Page 9 SYSTEM CONNECTIONS VCD AND CDP + TV 1. Connect AUDIO OUT2 jack of the VCD and CDP to AUDIO IN jack of the TV. 2. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. VCD AND CDP + TV + AMPLIFIER 1. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV. 2. Connect AUDIO OUT1 jack of the VCD and CDP to the AUX or CD INPUT jacks of the AMPLIFIER. 9 Downloaded From DvDPlayer-Manual.
Z-300M/30M 5/12/03 10:29 Page 10 MP3-DISC PLAYBACK HOW TO PLAYBACK MP3 DISC directly 1 After inserting MP3 Disc in the Set, Press the select button or Number button after Reading. HOW TO PLAYBACK MP3 DISC on MENU MODE 1 Select or 1 2 3 4 5 6 7 8 9 +10/0 2 After inserting MP3 Disc in the Set, Press the “DISC VIEW” button. 2 MP3 TOTAL: 150 PAGE 002/030 TR : 017 ZOOM You can see the following information of Disc on the TV. MP3 You can see the information of Disc on the TV.
Z-300M/30M 5/12/03 10:29 Page 11 VIDEO-CD PLAYBACK HOW TO PLAYBACK VIDEO-CD version 2.0 • Turn on the Power button. 1 Press the Open/Close button. • The tray is ejected. 2 Insert a VIDEO-CD disc and press the Open/Close button. • Press the DISC CHANGE button for tray No selection. 5 Select a number from the menu and press it. Ex) When selecting No. 4 A woman's day. 4 Open/Close Open/Close TO RETURN TO THE PREVIOUS MENU Press the RETURN button.
Z-300M/30M 5/12/03 10:29 Page 12 SLOW MOTION SELECT SOUND TO YOUR PREFERENCE Press the SLOW button on the remote control when the play function is on. PREPARATION -Voices do not come out when the SLOW button is pressed SLOW -Slow playing is 1/2 of the normal playing speed at 1st press. -Slow playing is 1/4 of the normal playing speed at 2nd press. -Slow playing is 1/8 of the normal playing speed at 3rd press. -Slow playing is canceled at 4th press. -The sound is muted during the slow playing.
Z-300M/30M 5/12/03 10:29 Page 13 DISC VIEW FUNCTION • Desired music or video display can be used directly without by menu functions (VER 2.0 Mode). This function is possible in Ver 1.1 and Ver 2.0 menu off mode. TRACK VIEW In case of cancelling the TRACK VIEW function. • This function is performed in the STOP mode. • This function is used for show the first views by nine in track. Repress the DISC VIEW button. • If playbacks as original case. ex) VCD 1.
Z-300M/30M 5/12/03 10:29 Page 14 DISC VIEW FUNCTION REPEAT FUNCTION • Turn on the TV. • Load and play a disc. 1.TO REPEAT ONE TRACK INDEX VIEW • This function acts as displaying the track in playing sequently by time and so it's convenient for searching desired video. ex) VCD 1.1 Version 1 Press the REPEAT button. • "REPEAT" indicating the one track repeat lights and the one track is played repeatedly. REPEAT PAL/NTSC Press the PLAY button to playback.
Z-300M/30M 5/12/03 10:29 Page 15 PROGRAM FUNCTION • This function can program up to 30 tracks during STOP mode. ex) To program No.4 track of No.2 disc 1 Press the PROGRAM button. PROGRAM 4 PROGRAM P : 01 D1 - 000 In a second • After step 3, you must press the PROGRAM button again then the selected number (2-04) is programmed. • Up to 30 tracks can be programmed by repeating step 2 to 4. PROGRAM 2 Select the disc by pressing the DISC CHANGE button. • Press the DISC CHANGE button.
Z-300M/30M 5/12/03 10:29 Page 16 ZOOM FUNCTION • This function works only in the VCD play mode. 1 Press the DISC VIEW/ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM. DISC VIEW ZOOM 2 While in the 2 x ZOOM screen, press the DISC VIEW/ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM. DISC VIEW ZOOM 3 While in the stage of No.1 or No.2 above, press the , , , key to scroll the screen to the left, right, up, or down.
Z-300M/30M 5/12/03 10:29 Page 17 SEARCHING FUNCTIONS • Turn on the TV. • Load and play the disc. NOTE HIGH SPEED SEARCH • This function is used to searching disc for desired location. Press and hold down the Search button during the play. • Hold down the Previous/Next button on the front panel more In case of high speed search • When searching a CD disc, the volume is lowered and it advances in high speed.
Z-300M/30M 5/12/03 10:29 Page 18 SEARCHING FUNCTIONS TIME SEARCH 1 LAST MEMORY FUNCTION -If you press the STOP or POWER button during VIDEO-CD playback, a playback position slightly ahead of the current time or track is stored in the unit's memory. -You can easily find the memorized position or track just press the TIME SEARCH button. Press the TIME button. Time 01 02 : 23 00 : 00 TIME SEARCH METHOD 2 Enter the time by pressing the DIGIT button.
Z-300M/30M 5/12/03 10:29 Page 19 KARAOKE FUNCTION • Turn on the TV. • Load and play a disc. 1 Connect the MIC. • The key control will be displayed on the screen. KEY CONTROL FUNCTION • Make sure to be at the karaoke mode. Press the Key Control button • Press the Key Control button to adjust the key to suit to your voice. (the 15 step key control) 2 Load a disc and select a desired track. • Eject the tray by pressing the Open/Close button, load a disc and close the tray.
Z-300M/30M 5/12/03 10:29 Page 20 KARAOKE FUNCTION Adjust the Digital Echo. - This will add an echo to your voice, giving you the feeling of singing on stage, Adjust it as desired. Digital Echo To decrease echo effect To decrease or increase the volume of the Microphone: • Turning to the left decreases Mic Vol. Turning to the right increases Mic Vol. Mic Vol. To increase echo effect MIN MAX (SET) MIN MAX (SET) If howling occurs: -Reduce the microphone volume.
Z-300M/30M 5/12/03 10:29 Page 21 TROUBLE SHOOTING SYMPTOM CHECK AND ACTION Tray is not ejected. –Check if the power is turned on. The unit does not play Tray is ejected. –Check if a disc is loaded. –Check if a disc is contaminated or damaged. Remove disc, clean it and insert again. –Check if a disc is seated properly. Video or audio is muted, or tray is ejected after 2-5 seconds. –Check for condensation in unit. –Removed disc, leave the unit with the power turned on for 1-2 hours.
Z-300M/30M 5/12/03 10:29 Page 22 WHEN VIDEO IS DISPLAYED THROUGH SET -Source : VIDEO-CD DISC -Display :TV monitor CARE OF PLAYER AND DISCS CARE OF DISCS Use a soft, dry cloth for cleaning.
Z-300M/30M 5/12/03 10:29 Page 23 CARE OF PLAYER AND DISCS SPECIFICATIONS Cleaning the Player GENERAL – Power consumption: 8.5W - Use soft cloth or the dusting attachment of your vacuum cleaner to dust the exposed surface of the player. Use the vacuum cleaner attachment to remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. SPECIFICATIONS – Weight: 3.
