OWNER'S INSTRUCTIONS Z-10MM VIDEO-CD/CD/MP3 DISC PLAYER Before operating the unit, please read this manual throughly, and retain for future reference. COMPACT DIGITAL VIDEO COMPACT DIGITAL AUDIO This player does not apply to business use and CD-ROM/CD graphic discs cannot be played with this player. Even though the MP3 disc that you purchased contains the “MP3” mark on its cover, the disc not written data by the format of MPEG1 LAYER3 (file extention name: .MP3) can not be played back normally.
SAFETYPRECAUTIONS SAFETY PRECAUCAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE TOP COVER, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Do not damage the power cord. Damage to the power cord may cause a fire or shock hazard. • When unplugging the power cord, please hold by the plug and remove it carefully in standby mode. • When you finish operating the unit, always turn off the • • power. Leaving a disc loaded for a long time with power turned on may damage the disc. When you insert the disc, please do not insert over another disc. This product should not be used in business applications.
SAFETY INSTRUCTIONS READ INSTRUCTIONS • All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS • The safety and operating instructions should be retained for future reference. HEED WARNINGS • All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS • All operating and use instructions should be followed.
OUTDOOR ANTENNA GROUNDING • If an outside antenna is connected to the antenna terminal, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. • In the U.S.A section 810 of the National Electrical Code, ANSI/NFPA No.
CONTROLS AND COMPONENTS FRONT PANEL 6 1. Power STANDBY/ON button 7. MIC jacks 2. Remote Sensor 8. Digital Echo Volume knob 3. Play/Pause Select button 9. MIC Volume knob 4. Stop Return button 10. Key Control button 5. Skip Previous button 11. Key Control button 6. Skip Next button 12.
CONTROLS AND COMPONENTS REAR PANEL 1. AUDIO OUT1 - Connect to the AUDIO IN of your TV set. 2. VIDEO OUTPUT - Connect to the VIDEO IN of your TV set.
REMOTE CONTROL 1. STANDBY/ON button 2. DIGIT buttons 3. PROGRAM button 4. SOUND SELECTOR button 5. Al SLEEP button 6. SELECT(PLAY / PAUSE) button 7. STOP button 8. REPEAT/PAL/NTSC button 9. SLOW button 10. DISC VIEW/ZOOM button 11. TIME SEARCH(LAST MEMORY) button 12. PREVIOUS / NEXT(SKIP) button TO INSERT BATTERIES the battery 1 Open compartment cover. two "AAA" batteries Replace the cover. 2 Install observing the correct polarity 3 as shown in compartment.
SYSTEM CONNECTIONS VCD AND CDP + TV 1. Connect AUDIO OUT1 jack of the VCD and CDP to AUDIO IN jack of the TV. 2. Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV.
MP3-DISC PLAYBACK HOW TO PLAYBACK MP3 DISC directly 1 After inserting MP3 Disc in the Set, Press the select button or Number button after Reading. HOW TO PLAYBACK MP3 DISC on MENU MODE 1 Play/Pause Select or 1 After inserting MP3 Disc in the Set, Press the “DISC VIEW” button. 3 4 5 6 7 8 9 +10/0 You can see the information of Disc on the TV. MP3 TR : 016 TOTAL: 150 PAGE 003/030 0 : 02 :39 015 PBAY eI 016 DON’T FOR eI ZOOM 2 2 You can see the following information of Disc on the TV.
VIDEO-CD PLAYBACK HOW TO PLAYBACK VIDEO-CD version 2.0 • Press the STANDBY/ON button. 1 Press the Open button. 2 Insert a VIDEO-CD disc and push the door. • Make the printed side of the disk facing up. 5 Select a number from the menu and press it. Ex) When selecting No. 4 A woman's day. 4 TO RETURN TO THE PREVIOUS MENU Press the RETURN button. • When a wrong menu is selected or Stop Return other menu is about to be selected, hold down the RETURN button more than one second.
SLOW MOTION SELECT SOUND TO YOUR PREFERENCE Press the SLOW button on the remote control when the play function is on. PREPARATION -Voices do not come out when the SLOW button is pressed SLOW -Slow playing is 1/2 of the normal playing speed at 1st press. -Slow playing is 1/4 of the normal playing speed at 2nd press. -Slow playing is 1/8 of the normal playing speed at 3rd press. -Slow playing is canceled at 4th press. -The sound is muted during the slow playing. Press the SOUND SELECTOR button 1.
DISC VIEW FUNCTION • Desired music or video display can be used directly without by menu functions (VER 2.0 Mode). This function is possible in Ver 1.1 and Ver 2.0 menu off mode. In case of cancelling the TRACK VIEW function. TRACK VIEW • This function is used for show the first views by nine in track. ex) VCD 1.1 Version 1 Press the DISC VIEW button. • Nine tracks are presented with sound. Repress the DISC VIEW button. • If playbacks as original case.
DISC VIEW FUNCTION REPEAT FUNCTION • Turn on the TV. • Load and play a disc. 1.TO REPEAT ONE TRACK INDEX VIEW • This function acts as displaying the track in playing sequently by time and so it's convenient for searching desired video. ex) VCD 1.1 Version 1 Press the REPEAT button. • "REPEAT" indicating the one track repeat lights and the one track is played repeatedly. REPEAT PAL/NTSC Press the PLAY button to playback. TO REPEAT ONE DISC SELECT Press the REPEAT button again.
PROGRAM FUNCTION • This function can program up to 30 tracks during STOP mode. ex) To program No.4 track. 1 Press the PROGRAM button. 4 PROGRAM P : 01 000 PROGRAM Press the PLAY/PAUSE button. • Programming is completed, and the first track of the program is played. • When the PREVIOUS/NEXT button is pressed, the next or previous programmed track is played. PROGRAM 2 SELECT Press the track number to be programmed. • Press the digit buttons.
ZOOM FUNCTION • This function works only in the VCD play mode. 1 Press the DISC VIEW/ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM. DISC VIEW ZOOM 2 While in the 2 x ZOOM screen, press the DISC VIEW/ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM. DISC VIEW ZOOM 3 While in the stage of No.1 or No.2 above, press the , , , key to scroll the screen to the left, right, down or up.
SEARCHING FUNCTIONS • Turn on the TV. • Load and play the disc. NOTE HIGH SPEED SEARCH • This function is used to searching disc for desired location. Press and hold down the Search button during the play. • Hold down the Previous/Next button more than one second. In case of high speed search • When searching a CD disc, the volume is lowered and it advances in high speed. • If the search does not operate properly due to the noise, release the button momentarily and press it again.
SEARCHING FUNCTIONS TIME SEARCH 1 LAST MEMORY FUNCTION - If you press the STOP or STANDBY/ON button during VIDEO-CD playback, a playback position slightly ahead of the current time or track is stored in the unit's memory. - You can easily find the memorized position or track just press the TIME SEARCH button. Press the TIME button. Time 01 02 : 23 00 : 00 TIME SEARCH METHOD 2 Enter the time by pressing the DIGIT button.
KARAOKE FUNCTION • Turn on the TV. • Load and play a disc. 1 Connect the MIC. • The key control will be displayed on the screen. KEY CONTROL FUNCTION • Make sure to be at the karaoke mode. Press the Key Control button • Press the Key Control button to adjust the key to suit to your voice. (the 15 steps key control) 2 Insert a disc and select a desired track. • Open the door by pressing the Open button, insert a disc and push the door.
KARAOKE FUNCTION Adjust the Digital Echo. - This will add an echo to your voice, giving you the feeling of singing on stage, Adjust it as desired. To decrease echo effect To decrease or increase the volume of the Microphone: • Turning to the left decreases MIC Volume. Turning to the right increases MIC Volume. To increase echo effect (SET) (SET) If howling occurs: - Reduce the microphone volume. - Change the direction that the microphone faces. - Move the microphone away from the speaker.
TROUBLE SHOOTING SYMPTOM CHECK AND ACTION Picture appears late when SELECT(PLAY/PAUSE) button is pressed. – Repeated pressing of PLAY/STOP/OPEN caused disc drive motor to over heat, and protection circuit activated until motor cools down. Does not have video although disc is turned. – Check if TV power is turned on. – Check if connection is secure. – Check if the unit is bypassed. Picture shakes vertically. – Picture may shakes momentarily during transition from dark to bright.
WHEN VIDEO IS DISPLAYED THROUGH SET - Source : VIDEO-CD DISC - Display :TV monitor CARE OF PLAYER AND DISCS CARE OF DISCS Use a soft, dry cloth for cleaning. Clean the disc with water diluted with neutral detergent solution and wipe from inside to outside using dry cloth. * Color or sync is in trouble according to TV set. GENERAL INFORMATION ABOUT THE DISC GENERAL INFORMATION ABOUT THE DISC Compact Disc 8cm (3 inch) Digital Audio (Max. 20 min.
CARE OF PLAYER AND DISCS Cleaning the Player - Use soft cloth or the dusting attachment of your vacuum cleaner to dust the exposed surface of the player. Use the vacuum cleaner attachment to remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. - Some of plastic surfaces are easily scratched, and they can be marred by alcohol and various solvents.
In case the need for Servicing arises Don't hesitate to call any nearby AS center with your name, address and telephone number when anything wrong with your product occurs.
