Specifications

CONTENTS
6–1.2
DCS SOFTWARE MODIFICATIONS
FOR HOTEL / MOTEL PACKAGE
1. ACCOUNT CODES
Both FORCED and VOLUNTARY account codes have been eliminated in the Hotel/Motel
software package.
2. AUTHORIZATION CODE TABLE
The number of entries in the Authorization Code table has been reduced from 250 to 64
entries.
3. CID REVIEW BLOCKS
The number of CID / REVIEW blocks on the system has been reduced from 1000 to 250.
4. DID TRANSLATION TABLE
The number of entries in the DID translation table has been reduced from 500 to 100
entries for each of the 3 ring modes; DAY, NIGHT and WEEKEND.
5. PAGING GROUPS
The number of keysets that can be in any internal page group has been reduced from 80
to 32.
6. PICKUP GROUPS
The number of pickup groups on the system has been reduced from 20 to 5 and the
number of members per group has been limited to 32.
7. SPEED DIAL LIBRARY
The amount of speed dial numbers available on the system has been reduced from 1500
to 500.
8. STATION GROUPS
The number of station groups in the system has been reduced from 30 to 10, (groups
500 to 509), and the number of members for each group has been limited to 32.
9. TENANT SERVICE
The tenant service partition is not necessary for the Hotel / Motel package, so this
feature has been removed.
10. RING MODES
Since hotels have 24 hour operation, with multiple shifts, the DCS Hotel/Motel software
has been modified from two to three ring modes (A, B, C). That is, the system trunks,
door phones, etc. can be programmed to ring a destination for each of these three
modes. These modes can be changed either manually or automatically, according to the
hotel’s needs.
TABLE 6.1