Specifications

CONTENTS
2–5
8SLI
This card is a eight circuit analog station interface for industry standard single line tele-
phones or other analog peripheral devices. The 8SLI does not contain any over-voltage
protection and is not qualified as OPX. It also does not contain DTMF receivers, but shares
system DSP resources. It can be inserted in any universal card slot in all cabinets.
KDb-DLI
This is a small daughterboard that can be installed only in the 12 or 24 button keyset. The
KDb-DLI will provide one additional DLI circuit for the connection of any digital station
device such as a keyset, add-on module, SIM or DPIM. This KDb-DLI will only operate
when the keyset is connected to a DLI card installed in the KSU so it can use the second
B channel.
KDb-SLI
This is a daughterboard that can be installed only in the 12 or 24 button keyset. The KDb-
SLI will provide one additional SLI circuit for the connection of any standard telephone
device. This KDb-SLI will only operate when the keyset is connected to a DLI card in-
stalled in the first cabinet so it can use the second B channel.
NOTE: The circuitry on a KDb-SLI does not provide a disconnect signal or have the over-
voltage protection necessary for OPX operation.
8MWSLI
This card is an eight circuit analog station interface for industry standard single line tele-
phones that require operation of an industry standard message waiting lamp with a volt-
age range of 85~96 VDC. The lamp can be programmed to be on continuously or flash at
a programmable rate of 100ms to 2000 ms ON/OFF times. The 8MWSLI does not contain
any over-voltage protection and is not qualified as OPX. It also does not contain DTMF
receivers, but instead shares the system DSP resources. It can be inserted in any univer-
sal card slot in all cabinets.
AUTO ATTENDANT
This optional card can be used for either the Automated Attendant, Uniform Call Distribu-
tion or a combination of both. For more information about the Automated Attendant and
UCD, see section 4.1 System Features.
NOTE: Requires optional hardware and/or software. Ask your dealer for details.
DIAL BY VOICE
The optional Dial by Voice card controls the circuitry needed to support voice recognition
dialing. The circuit package can support two channels of seven users with 20 personal
speed dial numbers or one channel of five users with 40 personal speed dial numbers.
This feature is available to all keyset and single line telephone users.
NOTE: Requires optional hardware and/or software. Ask your dealer for details.