Specifications

GUIDE
CONTENTS
28
USING THE CONSOLE TO VIEW ROOM
STATUS
If your keyset has a room status view key and is equipped with one or two
consoles programmed with DSS/BLF keys for each of the rooms, you can view
the status of all programmed rooms on the console.
Press the Room Status View (RSV) key and dial the type of room status you
want to check from the list below.
TIGIDSUTATSNOITPIRCSED
0 ELBALIAVA NIKCEHCOTTSEUGAROFYDAERSIMOOR
1DEIPUCCO MOOREHTOTNIDEKCEHCSITSEUGA
2 GNINAELCSDEEN DENAELCEBOTSDEENMOOR
3ECNANETNIAMSDEENECNANETNIAMSERIUQERMOOR
4 DLOH DLEHGNIEBSIMOOR
When the digit is dialed all stations having that status will light steady red on the
console and all other LEDs will be off. In addition the LEDs will continue to show
the room status until either the timer expires or another RSV type has been
entered, or the ANS/RLS is pressed. Please note that the Occupied Status will
show all rooms that have a guest checked into them regardless of the rooms
cleaning status or hold status.
For systems with one touch room status feature access:
Press the RSV key associated with the room status type you wish to view. All
stations having that status will light steady red on the console, and all other
LEDs will be off. The LEDs will continue to show the room status until either the
timer expires or ANS/RLS is pressed. ANS/RLS must be pressed before the
next room status type can be displayed.