Owner`s manual

! F
SYMPTOMS CAUSE POSSIBLE SOLUTIONS PAG
VCR
TV recording does not work.
The video cassette's erase prevention tab
is broken off.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER REC button is not pressed
(the TIMER REC indicator is not lit).
Tape is old or worn.
Tracking adjustment is beyond range of
automatic tracking circuit.
Video heads are dirty.
Place a piece of adhesive tape over 40
the hole.
Reset the present time. 21,22
Reset the start/end time.
47
Timer recording does not
work. Press theTIMER REC button (the
47
TIMER REC indicator is lit).
Replace the tape.
Noise bars appear on the Adjust tracking manually using the TRK 42
screen. +/- buttons on the remote control.
Clean the video heads. 44
DVD
The disc is dirty. Eject the disc and clean it. 8
The playback picture has It is in fast forward or fast reverse Some times a small amount of picture
occasional distortion, playback, distortion may appear. This is not a -
malfunction.
No disc is inserted. Insert a disc. 51
An unplayable disc is inserted. Insert a playable disc (Check the disc
9
type and color system).
The disc is placed upside down. Place the disc with the playback side
51
The unit does not start down.
playback. The disc is not placed within the guide. Place the disc correctly inside the
51
guide ell the disc tray.
The parental lock function is set. Cancel the parental lock function or
70, 71
change the parental lock level.
Playback does not follow the It is in the mode of repeat playback, These operations may prevent a
course of the disc's program, memory playback, etc. proper progress of the contents.
"X" appears on the screen. The function is prohibited with the unit or _ 9
the disc.
REMOTE CONTROL
Aim the remote control at the remote
12
sensor.
Operate within 5 m or reduce the light 12
Remote control does not of the room.
operate. Clear the path of the beam. 12
The remote control is not aimed at the
sensor.
Distance is too far or too much light in the
room.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
Replace the batteries. 12
Insert correctly. 12
o
¢#
75