Owner`s manual

the digital setup (digital mode)
0-7
ENTER
MENU
÷
When two or more audio languages are included in a
digital signal, you can select one of the audio languages.
Press MENU in the digital mode, then press •
or • to select _] option.
CJ....: :
Press • or • to select "DIGITAL SETUP", then
press •.
Press • or • to select "AUDIO LANGUAGE".then press 1_.
Press •/• or Number buttons (0-7) to select
desired language, then press ENTER.
CD_(A)
(Ab_CD
CD
(3D
Press MENU repeatedly until the menu screen
is cleared.
_ENU
SETUP
©
Use this feature to select the digital audio output format
when you connect a Dolby Digital decoder or other digital
audio system to the coaxial digital audio output on the TV.
Fellow the left steps 1-2.
Press • or • to select "DIGITAL OUTPUT",
then press • or • to select PCM or DOLBY
DiGiTAL.
Press MENU repeatedly until the menu screenis cleared.
SETUP
©
You can check the strength of the digital signal by viewing
the digital signal meter.
Fellow the left steps 1-2.
Press • or • to select "SIGNAL METER", then
press • to check the digital signal strength.
Press MENU repeatedly until the menu screen
is cleared.
M_U
SETU_
©
Notes:
* Signal meter feature is not available for analog channels.
* After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-operation automatically.
. When you select a vacant channel, the signal meter may
react. 39
o
o
÷
5V60101A [E]p30-39 39 _ 2/22/06, 1:05 PM