Owner`s manual

memorize channels

This unit is equipped with a channel memory feature which allows

channels to skip up or down to the next channel set into memory,

skipping over unwanted channels. Before selecting channels, they

must be programmed into the unit's memory. To use this unit with an

antenna, set the TV/CABLE selection to the TV position. When

shipped from the factory, this selection is in the CABLE position.

Press MENU in the TV mode, then press < or

• to select opt=on.

SETUP

0 i i

_>_, ,i_

Press • or • to select "TV/CABLE'.

Press MENU repeatedly until the menu screen iscleared.

M_t_U

SETUP

Note:

You cannot select "TV/CABLE" and "CR PROGRAM" features if

you set the channel to "VIDEO1 ", "VIDEO2" or "ColorStream".

Press MENU in the TV mode, then press < or

• to select option.

S_rUP

Press • or • to select "CH PROGRAM".

Press • to start "CH PROGRAM".

The unit will begin memorizing all the channels

available in your area.

(Analog tuning)

(Digital tuning)

When channel programming is complete, the

message "COMPLETED" appears.

Press CH A or v to view the programmed

channels.

5V 0101A [E]p23-29

2/22/06, 6:14 PM