Owner`s manual

÷
To turn on the unit, press POWER.
The Power indicator will light.
= Every time you turn on the TV, the unit starts from
TVNCR mode. When you use TVNCR after DVD
operation, press TV/VCR.
©
Adjust the volume level by pressing VOL + or -.
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Set the TV/CABLE selection to the appropriate
position [_.
TV - VHF/UHF channels
CABLE - Cable TV channels
Press INPUT. Then press A/V or Number
buttons (0 or 1) to select the desired mode
(0:ANALOG MODE, 1 :DIGITAL MODE), then press
ENTER.
INPUT
zoou
©
Press CH A/v or Direct channel selection
buttons (0-9) and m button to select the
channel.
channel 125, press 1,2, 5.
To change to a specific digital channel:
Press the first 3 digits, then press m, followed
by the remaining 3 digits. For example, to select
channel 015-001, press 0, 1,5, m, 0, 0, 1.
TV Cable TV
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-l)
100-125
(100) (125)
01
(5A)
Notes:
° Digital cable channels may be represented by channel
numbers that include a "dash" (e.g., 85-002.) These digital
channel numbers may not match the numbers in the
channel line-up provided by your cable company. This is not
a malfunction.
• If a channel with no broadcast is selected, the sound will auto-
matically be muted.
• If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
÷
24
5V 0101A [E]p23-29
24 _ 2/22/06, 1:03 PM