Owner`s manual

setting (Continued)
ENTER
AIvI,I•
MENU
÷
You must set the date and time manually for timer recordings, ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
r
EXAMPLE: Setting the clock to "8:30 AM", 25th. (SAT)
March, 2006.
Press MENU, then press < or • to select
_#_;.option.
SETU_
C)
Press • or • to select "CLOCK SET", then
press •.
Press • or • to set the month, then press •.
Set the day, year and time as in step 3, then
press ENTER.
After setting the clock, date and time starts
functioning automatically.
[] To make corrections anytime during the process
Press • or • repeatedly until the item you want to
change blinks, then set the item again.
Notes:
* After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
When you set the minute, you can change in 10-minutes step
by holding down • or •.
÷
22
5V 0101A [E]p19-22
22 _ 2/22/06, 1:03 PM