Owner`s manual

_nnecting to optional equipment
Before connecting the unit to other equipment, be sure to turn off the power and
unplug all of the equipment from the wall outlet before making any connections.
You can enjoy the camcorder or high quality dynamic sounds of DVD video discs or
audio CDs by connecting the unit to optional audio equipment.
Press iNPUT. Press A/v or Number buttons (0-4) to select the desired mode, then press ENTER.
"VIDEO1", "VIDEO2", "ColorStream", Analog channel or Digital channel will display on the screen for 4 seconds.
Analog channel _ Digital channel _ VIDEO1
t (Back)
-- ColorStream _ VIDEO2 -___1
(Back) (Front)
o
O
¢#
O
÷
To playback from the camcorder, connect the camcorder to the unit as shown. And select "VIDEO2" input source.
_ Signal flow
To S-Video out
To Audio/Video out
?
S-Video cable (not supplied) To S-Video IN _)
/
To Video IN (yellow) IN (white, red)
Audio/Video cable (not supplied)
Notes:
• If your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video
cable for better picture quality. Do not connect both a standard video cable and an S-video cable at the same time, or the
picture performance will be unacceptable.
• You can also use the AUDIO(L/R)/VIDEO IN jacks on the rear of the unit.
(L/R)
÷
This connection allows you to watch DTV (digital TV) and TV programs, and record DTV and TV programs.
Your TV ®
has ColerStream (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
Signal flow Rear_
ecewr
t t t tt
component COMPONENT
video out AUDIO IN
Component video cable (not supplied)
To COMPONENT
VIDEO IN jacks
(Y)
15
5V60101A [E]p13-18 15 _ 2/22/06, 1:02 PM