Owner`s manual

ble TV connections

This unit has anextended tuning range and can tune most cable channels without using a CableTV converter box.

Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for

normal viewing requiresthe use of a descrambler device which is generally provided by the cable company.

For subscribers to basic cable TV service

"_ _ For basic cable service not requiring a converter/descrambler

box, connect the Cable TV 75 ohm coaxial cable directly to the

Antenna jack on the back of the unit.

Antenna

jack

75 ohm

coaxial cable

For subscribers to scrambled cable TV service

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the

incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect

the output jack of the converter/descrambler box to the antenna jack on the unit. Follow the connections shown

below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the

converter/descrambler box to select channels.

Incoming Antenna

75 ohm 75 ohm cable to jack

Cable TV _. Converter/ i the unitdescrambler

For subscribers to unscrambled basic cable TV service w!th scrambled 1

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the

use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the

cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"

position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune your

unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box

to tune scrambled channels.

_Sp Converter/

Incoming descrambler Antenna

75 ohm 75 ohm cable to jack

Cable TV the unit

litter A/B switch| 0/,-,. _ ->

5V 0101A [E]p13-18

14 _ 2/22/06, 1:02 PM