YP-T5 - MP3 and WMA playback - Removable Storage Device - Encoding function - FM reception - 3D sound - Upgradable - 12 hours of continuous play AH68-01567B (Rev 0.
Contents Additional Usage Preparations Safety Instructions Features Accessories Location of Controls (yepp) 4 6 9 10 Connection to Computer Connecting the yepp to a PC Manual Installation of the USB Driver Using the removable storage ● Downloading/Uploading files ● Disconnecting the USB cable ● Formatting Installing yepp Studio ● To View Help on yepp Studio 12 16 20 20 21 22 23 25 Basic Usage Playing Music and Turning Off the Device Adjusting the Volume/Hold Function Recording Voice MP3 Encoding Searchi
Safety Instructions Earphones Read and understand all the instructions to avoid injury to yourself and damage to the equipment. Do not expose to extreme temperatures (above 95°F or below 23°F). Do not expose to moisture. Do not apply excessive pressure to the device. Do not let any foreign matter spill into the device. Follow Traffic Safety Instructions ● ● Do not use the earphones while driving an automobile or riding a bicycle. It’s not only dangerous, but also against the law.
MP3 & WMA Playback ● ● MP3 is an MPEG1 Layer3 audio format. WMA is a Microsoft Windows Media audio format. Removable Storage Device ● You can easily copy and paste files to the yepp player using Windows Explorer. Encoding Function 6 ● You can make an MP3 file from an external source using the ENC jack on the main unit. ● You can also convert an FM radio program into an MP3 file in real time. FM Reception ● Listening to an FM program is made easy with Auto Search and Frequency Memory functions.
Accessories 12-Hour Continuous Play ● This unit uses one AAA/LR03 alkaline battery. Operation can last up to 12hours. Actual playing time may vary according to the type and capacity of the battery. Player Carrying case Earphones USB cable User manual Voice Recording Function ● You can do a Voice Recording with high quality and use it for a conference. One Battery (1.5V AAA/LR03 type) Sound ● 8 You can adjust the equalizer manually.
Location of Controls (yepp) Display Neck strap Hook Display MENU, Navigation button/ Move to Track/Speed Search/ Volume Button Track Number indicator Play/Stop/Pause indicator Equalizer, SRS indicator Bit rate indicator Play mode indicator Remaining Battery Power indicator Playtime indicator Title (track & artist) indicator Mode indicator Loop Repeating Button Play/Pause Button Recording Button Hold Switch Inserting a Battery Microphone 1 ENC Jack N Earphone Jack USB Cable Connection Port 2 Sl
Connecting the yepp to a PC System Requirements. The PC system must meet the following specifications: ● Pentium 133MHz or greater. ● Windows 98SE/ME/2000/XP. ● 40MB of available hard disk space ● CD-ROM drive. (double speed or greater) ● USB port (1.1) supported. ● DirectX 8.0 or above. Before connecting yepp to PC, make sure to install USB driver. If “Add New Hardware Wizard”appears, press the [Cancel] button and install the USB driver.
Connecting the yepp to a PC Connecting the yepp to a PC with a USB cable 3 4 How to check the USB driver Connect a USB cable to the USB port on the computer. ● Connect the other end of a USB cable to the USB cable connection port on the bottom of the yepp, and press the button on the main unit. ● ● 6 14 Control Panel → System → Device Manager → Disk Drives → Samsung yepp YP-T5 The USB driver is installed with a message saying that it is searching for a new device.
Manual Installation of the USB Driver Go to “Downloading/Uploading files” on page 20 if the USB driver is in place.
Manual Installation of the USB Driver In Windows 98 Click [Next] button in the series of windows that appear. ● USB driver location [CD ROM]\setup\Drivers Note ● 18 You must reboot your computer to complete the installation. You cannot use it as a removable disk in Windows 98 if the YP-T5 program is not installed. Make sure to install the USB driver file first.
Using the removable storage Disconnecting the USB cable Downloading/Uploading files After completing the file transmission, you must disconnect the cable in the following way: 1 2 3 Connect the yepp to your PC and turn it on. 1 Open Windows Explorer on PC. Select the file to save and drag-and-drop it into the removable disk icon. (In numerical, alphabetical order) 2 Double-click on the green arrow in the taskbar on the bottom right of the window.
Using the removable storage Installing yepp Studio Formatting 1 1 Select the removable disk icon and click the right mouse button to select [Format]. 2 Insert the Installation CD into CD-ROM drive. Select [yepp Studio]. Press the [Start] button. ● ● All saved files will be formatted. You can change the name of removable disk by selecting [Volume label]. 2 Select language Note 22 ● By formatting, all previously preset menus will be initialized.
Installing yepp Studio To View Help on yepp Studio 3 Click [Next] in the series of windows that appear. ● Please refer to Help for more information on how to use yepp Studio. Run yepp Studio and press F1. ● Help will appear. Move the arrow to the top of yepp Studio and right click on the mouse. The following selection window will appear. ● Click on Help and the Help window will appear.
Playing Music and Turning Off the Device Adjusting the Volume/Hold Function Adjusting the Volume Turning Power On and Off ● Power On : Press the button to turn on the power. button to turn off the power. ● Power Off : Press and hold the Press the , key during playback to adjust the volume. Playing Music Press the Note button. ● Playback starts. ● Volume ranges from 00 to 30. ● Press once to adjust the volume by one step. Press and hold to increase or decrease the volume in greater increments.
Recording Voice 1 2 Press the REC button to start voice recording. MP3 Encoding 1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable. 2 Press the REC button to start MP3 encoding. 3 If the REC button is pressed during encoding, the encoding stops and an encoding file is created. If the REC button is pressed again, the recording stops and a voice file is created.
Searching for Music/Voice Files Listening to FM Radio First, press the To search for specific parts during play ● Pull and hold the , keys to the left or right during playback to search for the part you want to listen to. ● Release the key to resume play normally. key to display the menu screen and select FM Radio. Manual Search for a Frequency ● Pull the , keys briefly to search manually for the frequency you want.
Listening to FM Radio FM Encoding Searching Stored Frequencies 1 2 Press the ● Press the REC button during FM reception. 2 Press the REC button again. button in FM Mode. ● Encoding of the currently transmitted FM broadcast begins. PRESET screen will appear. Use the , keys to move to the frequency you want. Deleting Stored Frequencies - After moving to the PRESET number you want to delete, press and hold the ● 1 ● A file is created and the encoding stops.
Loop Repeating Using Navigation Starting Point While playing music files, press the A↔B button briefly at the beginning of the loop you want to set. A↔ appears in the display. Ending Point Press the A↔B button briefly again to set the end of the loop. You can easily search for files or switch modes using the Navigation function. 1 Press and hold the button to move to Navigation mode. A↔B appears in the display. The loop is played repeatedly. When the folder is in play or stop status.
Setting Playlist Setting up MENU Press the Setting Playlist Use the - Move to the file you want in Navigation mode and press the ● The selected file will be marked. ● To release the playlist setting, move to the marked file in Navigation mode and press the key. key to switch to MENU mode. , key to move and press the Press and hold the key briefly to select the menu you want. key to exit the MENU mode. key again. Playing Playlist 1 2 ● ● ● The Playlist you set will be displayed.
Managing Files Deleting 1 2 3 Formatting Select File in the MENU. (refer to “Setting up MENU”) In File, select File Delete and the mode the target file is in. Use the , key to move to the file you want to delete, press the select CONFIRM. Press the key briefly to exit the setting. 1 Select File in the MENU. (refer to “Setting up MENU”) 2 Select Format in File. ● Formatting is performed if CONFIRM is selected. key and Note 38 ● All files will be deleted when formatting the built-in memory.
Setting the Advanced Functions Settings 1 2 Select Settings in the MENU. (refer to “Setting up MENU”) Selecting the Play mode 1 2 Select Play mode in Settings. In Play mode, use the , key to move to the mode you want and press the key to select. In Settings, use the , key to move to the function you want and press the key to select. ● Use key to move to upper menu. Normal: To play all the tracks in order one time. Repeat one: To repeat one track. ● Repeat all: To repeat all tracks.
Setting the EQ mode Display Select Display in Settings. 1 2 Select Sound in Settings. In Sound, use the , Scroll Speed key to move to the sound mode you want and press the SRS ( ): You will hear 3D Stereo sound. TruBass ( ): This is a bass boost feature that adds fullness to the sound. ● WOW: This feature allows you to enjoy the SRS and Trubass features simultaneously. ● If you want bass boost, select DBB. ● ● key. Use the , key to set the scroll speed.
Display Backlight [ LCD color ] ● [ Light Time - Jog ] Use the , key to select the LCD color you want, out of 7 colors. Use the , key to set the Light-On time. The setting range for Light-On Time is 0 to 10 seconds. ● When set to On, the Light stays on continuously. ● Green N Red Violet N Orange N Sky-Blue N Lilac N Random N Blue N ● [ Light Time - LCD ] ● Use the , key to set the LCD Light-Off time. ● The setting range for Light-On Time is 0 to 10 seconds.
Power Off Time Select Power off in Settings. Encoding Select Encoding in Settings. Time Use the , key to set the Power-Off time. You can set the time from 0 to 1 minute. If no key is pressed after play stops, the unit will automatically turn off after the time you set. ● If you set it to 0 seconds, it will not turn off automatically. Bitrate ● ● ● ● AutoSync Time Sleep Use the , key to set the Sleep time.
WOW Level Select WOW level in Settings. Default Volume Select Default vol in Settings. Adjusting SRS and TruBass LEVEL If you select SRS or TruBass in WOW level, you can adjust the level of SRS and TruBass. ● Use the , key to select the level you want. ● The level for SRS and TruBass can each be set within the range of 0 to 10. ● Default vol Use the , key to set the default volume value. ● It is possible to set the default volume to a value between 0 and 25(MAX).
MENU Table ● 50 Use the key to move and select.
Troubleshooting The software doesn’t work ● The buttons do not work. Refer to the recommended PC specifications. ● ● Check setting of Hold switch. Remove the battery once and then insert it again. yepp does not work and the LCD displays nothing. ● ● The yepp keeps being turned off. Check the battery capacity Check to see if the battery is inserted to the right poles ( + , – ) In PLAY mode, music is not played after pressing the Check to see if MP3 or WMA files are saved in the built-in memory.
Specifications Model Built-in Memory capacity Voltage Playing time Dimensions/Weight Case Noise Ratio Earphones Jack Output Power Output Frequency Range Operating Temperature Range FM Frequency FM Signal to Noise Ratio FM T.H.D FM Useable Sensitivity File Support MEMO YP-T5 128MB(YP-T5 H), 256MB(YP-T5 V), 512MB(YP-T5 X) 1.
