Owner's Manual

•
After
wall
mount installation, movement may occur
on
some
TV
models depending
on
the
rear shape
of
the
TV.
In
this
case,
use
the separation holder
(G).
Triangular support allows more stable
wall
mount
installation. However, distance from
the
wall
may increase.
• If
you cannot adjust the horizontal level by using
the
horizontal adjustment function, check
if
the installation was
done properly.
If
you cannot
use
the
horizontal adjustment function, the fixers
on
the
wall
mount's support frame are not
properly fixed. Make sure
to
install
them
properly.
•
The horizontal level
that
can
be
adjusted
is
just
1
to
2 degrees.
To
adjust
the
horizontal level at more angles than
this
range, reinstall the
wall
mount.
t t
•
If
the
wall
mount's fixers are not fixed
to
the
end
as
shown in
the
figure, subtle impacts may move
the
TV.
In
this
case,
make sure
to
install
the
fixers properly
so
that
they are fixed to
the
TV
all
the
way
to
the
end.
,.
-
/;:
I " /
/
\
, / v
\
.·
I
"'-'#11'
"'
•
You
do not need
to
use
the cable guide
(G).
Use
it
depending
on
the installation condition.
• Cable
guide
(G)
double-sided tape may not stick or may
not
stick
well
depending
on
your
wall
surface
(ex.:
uneven) or material.
It
may also lose stickiness
overtime
under some installation conditions.
• Cable
guides
(G)
may harden
if
stored in a cold place.
In
such
cases,
keep
them
at room temperature (around
20
degrees)
forl-2
hours.
• When removing cable guides
(41),
the
wall
may
be
damaged in some surroundings.
(Ex.:
wall
surface chipped,
paint chipped, etc.)
•
When attaching cable guides
(G)
to
the
wall,
we recommend installing
at
least
30
mm
from
the
TV
connector to
prevent damage
to
the cable guide due
to
the
distance between the
TV
connector and wall.
-English
6-
-5-