Installation Guide

Maintenance

English46

Cleaning

Surface of the washer

Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the

washer.

Mesh lter

Clean the mesh lter of the water hose once or twice a year.

1. Turn off the washer, and then unplug

the power cord.

2. Close the faucet.

3. Loosen and disconnect the water hose

from the back of the washer. Cover the

hose with a cloth to prevent water from

gushing out.

4. Use pliers to pull out the mesh lter

from the inlet valve.

5. Submerge the mesh lter deeply in

water so that the threaded connector is

also submerged.

6. Dry the mesh lter completely in a

shaded area.

7. Reinsert the mesh lter into the inlet

valve, and reconnect the water hose to

the inlet valve.

8. Open the faucet.

NOTE

If the mesh lter is clogged, the “4C” information code appears on the the washer’s display

screen

WF5500M-03773A-00_EN.indd 46 12/20/2016 12:02:10 PM