Service manual

Disassembly and Reassembly
4-18
4-15 MP Ass'y
1. Before you remove the MP Ass’y, you should
remove:
- Rear Cover (see page 4-1)
- Shield Main Upper (see page 4-2)
- Side Cover Ass'y (see page 4-9)
2. Unplug the two connectors.
3. Remove the one screw and take out the Dummy
Cover.
4. remove the three screws.
5. Release the SMPS fit. Pull the MP Ass'y upward
and remove it.
Dummy Cover
MP Ass’y