Service manual

Disassembly and Reassembly
4-17
4-14 Main Frame Ass'y
1. Before you remove the LSU, you should remove:
- Rear Cover (see page 4-1)
- Scanner Ass'y (see page 4-2)
- Side Cover Ass'y (see page 4-9)
- Fuser (see page 4-11)
- Exit Ass'y (see page 4-12)
- Cover Paper Exit Ass’y(see page 4-12)
- SMPS (see page 4-14)
- LSU (see page 4-15)
2. Remove one screw in the Channel Base Frame
from the bellow section of the Base Frame, and
then remove the rest of the five screws to dis-
semble the Dummy Base Frame, the Cover
Front and the Cam Jam Remove.
3. Remove the Locker Deve, and then remove the
one screw and the Cover Motor Bracket.
4. Unplug the all connectors.
5. Remove the seven screws and take out the
Main Frame Ass'y.
Dummy Base Frame
Cam Jam Remove
Front Cover
Lock Deve
Cover Motor Bracket
Main Frame Ass’y