User Manual

Operation
English16
Operation
• If the Auto Empty function is enabled, the Auto
Empty LED indicator turns white.
- Press the Auto Empty button to enable and
disable the function.
• For optimal performance, we recommend
enabling the Auto Empty function.
- The Auto Empty function can affect the
performance of the Spinning Cyclone Filter
and the self-diagnosis.
NOTE
• After emptying the dustbin, the self-diagnosis
process starts for optimal performance. Wait for
the self-diagnosis process to complete before
using the vacuum cleaner again.
• After the self-diagnosis, diagnostic results and
a user guide is provided for the optimized use of
the vacuum cleaner.
• You can start the self-diagnosis process on the
SmartThings app, or by simultaneously pressing
the + and – buttons.
• The initial default suction power mode is 'AI'.
The self-diagnosis function turns off if you
change the default suction power to a different
mode in the SmartThings app. However, if
you have used the vacuum cleaner in the 'AI'
suction power mode for more than 5 minutes,
the self-diagnosis function starts when you put
the vacuum cleaner on the clean station even if
the default suction power mode is not 'AI' in the
SmartThings app.
Untitled-4 16 2023-09-13  11:33:28