User Manual

English14
Operation
For detailed information, please refer to the QR code.
Installing the Clean Station
• Run the power cord of the Clean Station along the round groove at the bottom.
- Make sure the power cord is correctly placed so that the Clean Station stands without tilting.
• Before plugging in the Clean Station, arrange the power cord neatly.
• When plugging in the Clean Station, the START/STOP button turns blue for 5 seconds and goes off.
Using the Clean Station
START/STOP button
• The vacuum cleaner’s dustbin will be emptied automatically when you put the vacuum cleaner on the
Clean Station.
- The Auto Empty function is enabled as a default setting.
• You can press the START/STOP button to start or stop the emptying process at a desired time.
• If the vacuum cleaner is placed back on the Clean Station within a minute from it was taken off from the
Clean Station, the Auto Empty function will not operate even it the function is enabled.
Operation
Untitled-4 14 2023-09-13  11:33:28