Specifications
5-94 | OWNER’S GUIDE
3210-EXP8-L
analog cable
The 3210-EXP8-L cable connects the DEWE-30-8-EXP expansion rack to the DEWE-3210 model. It pro-
vides signal connection. Power and RS485 module control are via a separate cable.
- This expansion/connector does not apply to the DEWE-3211 model, which already has 16 MDAQ channels on its
left side panel
Digital I/O connector (AKA “Accessory connector”)
Connector: Standard DSUB 37-pin connector, female
Mating connector: Standard DSUB 37-pin connector, female
Function: Provides access to the digital input/output lines on the installed A/D card, as well as additional
signals such as clock input, trigger input, and more (see A/D card table related to the installed card).
The exact pin-out of this connector can vary according to the system conguration, but here is the typical
pin-out diagram when an ORION-1616-100 card is installed:
DC Power &
control cable