Specifications
OWNER’S GUIDE DEWE3210 | 593
Expansion connector (DEWE-3210 model)
ANALOG INPUT connector
Connector: LEMO 19-pin LEMO EGG.2B.319.CLL, marked ANALOG INPUT
Mating cable: 3210-EXP8-L
Function: The DEWE-3210 can be congured with a 16 channel A/D card inside. The rst eight channels
are wired to the DAQ modules on the left side panel. Therefore, the other eight channels are brought to this
ANALOG INPUT connector on the left side panel, whereby you may connect an expansion rack such as the
DEWE-30-8, in order to address these eight channels.
Pin Signal Pin Signal
1 AI 8+ 2 AI 8 GND
3 AI 9+ 4 AI 9 GND
5 AI 10+ 6 AI 10 GND
7 AI 11+ 8 AI 11 GND
9 AI 12+ 10 AI 12 GND
11 AI 13+ 12 AI 13 GND
13 AI 14+ 14 AI 14 GND
15 AI 15+ 16 AI 15 GND
17 N.C. 18 N.C.
19 N.C.
The DEWE-30-8 expansion rack needs two connections to the DEWE-3210 mainframe:
1. The analog connection as shown above via the 3210-EXP8-L cable as shown above, and
2. POWER and MODULE CONTROL are carried to the DEWE-30-8 expansion rack via the EPAD connec-
tor. Therefore, the additional modules in the expansion rack will be controllable within the software just as if
the inputs were physically installed within the DEWE-3210 mainframe.
DEWE-30-8-EXPANSION Rack (Optional)