Specifications
OWNER’S GUIDE DEWE3210 | 591
Signal Input Connectors
Analog input connectors (8 or 16)
Connector: Varies according to the signal conditioning module(s) installed
See the signal conditioning tables for further details about the module(s) installed within your system.
Function: to input analog signals to the dynamic measuring inputs of the DEWE-3210 or DEWE-3211.
Above: typical DEWE-3210 showing 8 DAQ modules plugged in
Counter/encoder connectors (2)
Connector: LEMO EGG.1B.307CLAD52
Mating connector: LEMO FGG.1B.307CLAD52
Mating cable available: CTR-CABLE-05 (includes connector)
Function: used to input tachometer, TTL level pulse train, or encoder outputs for measuring and conversion.
- Note: see the COUNTER conguration section later in this guide.