Specifications

OWNER’S GUIDE  DEWE3210 | 583
System Connectors
System/PC connectors
Ground (earth) Connector
Connector: insulated banana jack, marked with the ground/earth symbol, yellow with green stripe
Mating connector: insulated banana plug, yellow with green stripe
Function: Depending on your electrical environment, it may be necessary to give the system an additional
ground connection. This is an international standard mini-banana jack, color coded yellow/green, located
near the DC power input.
DC power input
Connector: LEMO power connector, as shown in the picture above. The connector is this LEMO model:
EGJ-2B-302-CLA. The appropriate mating connector is LEMO FGJ.302.CLLD-XX (where XX is the cable
size).
The mating cable called CBL-DPS-2410 is provided to connect the DEWE-3210 to the DPS-2410 power
supply. This cable is 2 meters long. It has FGJ.302.CLLD-XX on the side that plugs into the DEWE-3210,
and FGG.2B.302-CLAD-XX on the side that plugs into the DPS-2410 AD/DC power supply.
Permissable power inputs are 18-24VDC.
⇒ Important note - power input must not exceed 24VDC! System damage will occur.
Fuse
The system DC power is fused using a REGULAR ATO 15A fast-acting blade fuse. Blue is the ATO standard
color code for a15 amperes fuse rating. ISO 8820-3:2002 standard.
⇒ Replace this fuse only with exactly the same type, or equipment damage, injury or even death can result.
KEY PIN: (+)
LOW PIN: (–)
DC Power Input
LEMO connector
EGJ-2B-302-CLA