Specifications

4-76 | OWNER’S GUIDE
Advanced Counter/Encoders (UP-
ORION-CTR8 option)
Advanced counter/encoders 8 advanced 32-bit counters
Counter timebase 80 MHz (40 MHz max. input frequency)
Measurement modes Event counting, up/down counting, gated
event counting, period time, pulse width,
two-edge separation, frequency and encoder
measurements
Signal levels Symmetrical, differential
AC/DC coupling selectable
Trigger adjustment range 0 to 40 VDC with 40 mV resolution
Trigger level accuracy ±100 mV ±1% of trigger level
Common voltage range -35 to 50V
Overvoltage input protection ±100 V continuous
Max. DC level @ AC coupling: ±50 V continuous
CAN BUS specs (UP-ORION-CAN2
option)
High-speed CAN interfaces 2 CAN 2.0B high speed interfaces
Bus pin fault protection ±36 V
ESD protection 12kV
Physical layer High speed
Compatibility 2.0B standard, J1939 protocol support
OBD II via software option
Encoder
Tacho
Gearthooth, CDM
Gearthooth, TRG, CDM and TRG
Gearthooth with missing teeth
Gearthooth with double teeth
Linear encoder
Linear pulse sensor
Basic counting
Gated counting
Period frequency
Two pulse edge separation
Up/down counting
Period, pulse width,
frequency, duty cycle
RPM-Measurement
Length-measurement
Waveform Timing
Event Counting