Specifications
4-58 | OWNER’S GUIDE
Connecting the MOB-DISP-17 to your D3PC-8
The D3PC-8 has been made specically to support the MOB-DISP-17 (Mobile Display, 17 inches) from
DEWETRON. This is a ruggedized mobile display that is designed to be installed inside vehicles. It has
suction cup mounting positions, as well as VESA 75 mounting holes for this purpose. The MOB-DISP-17
accepts a standard VGA or DVI interface, therefore it can be connected directly to the VGA output of the
D3PC. In addition, the MOB-DISP-17 can be POWERED by the 12VDC output on the rear panel of the
D3PC.
Finally, a USB 2.0 cable should be connected between the D3PC and the MOB-DISP-17, to enable the
display’s TOUCHSCREEN capabilities, and to activate the USB 2.0 convenience jacks that are located on
the mobile display.
The MOB-DISP-17 is the perfect addition to your DEWETRON system, especially when it will be used in a
mobile or challenging physical environment. For complete technical details about the MOB-DISP-17, please
refer to the section of this document, “MOB-DISP-17 Mobile Display” on page 10-266.
Red - 12 VDC power cable
Blue - USB 2.0 cable (A/B)
Green - VGA cable