Specifications
OWNER’S GUIDE DEWETRON SENSORS | 19465
Recording with your DEWE-CAM-USB
In the previous steps we turned on the camera in general within the software. This is analogous to turning on
your A/D card at the hardware setup level. But in order to record video from the camera we need to cong-
ure it on the Channel Setup screen (just like we do analog and digital channels).
On the Channel Setup screen, click the VIDEO icon.
- Note - if you don’t see a VIDEO icon here, then either DirectX video is not enabled or your camera is not enabled
on the HARDWARE SETTINGS screen, or the camera was not plugged in when the software was launched. Check
those settings and then come back to this point when you have gotten a VIDEO icon here.
In the CAMERA OPTIONS area you will see your camera. Enable the USED button. This will activate the
camera and allow it to be viewed and recorded. You can click the SETUP button to congure the detailed
settings of the camera. Now go to the MEASURE screens and add your camera to any screen of your
choosing. When you STORE data, video will be recorded automatically.