Specifications

19-462 | OWNER’S GUIDE
DEWE-CAMS
DEWE-CAM-USB
This camera is a USB 2.0 compatible DirectX cam-
era that is compatible with all DEWETRON systems.
For use within the software, the Windows driver
must be installed. In addition, the camera must be
attached to the DEWETRON system before the soft-
ware is started. Further operational guidelines are
presented at the end of this section.
The DEWE-CAM-USB has an integral USB 2.0
cable which connects to your DEWETRON sys-
tem. The camera is also powered via the 500 mA
available on the USB port, and there is no separate
power input possible on the camera. As a result, you
should always connect the camera to a USB port
on the DEWETRON system - and never via a USB
hub or other in between device (such as the MOB-
DISP-17, as one example).
Outline Drawing
Operating System Drivers
 Windows 32-bit: SFT-04040, driver and stand-alone video viewer
 Windows 64-bit SFT-10028, driver only (please download SFT-04040 for a viewer)
Please see the DEWE-CAM-USB web page at www.dewamerica.com to download the latest drivers.