Specifications

18-458 | OWNER’S GUIDE
the separate documentation about these capabilities for further details.
Displaying CAN channels
Whichever CAN channels are pressed in as USED on the CAN setup screen, will be displayed on the
measure screens, as shown below. We made a simple screen which populates the CAN channels into digital
meters. Below that, each of the four wheel speed channels are shown in a recorder graph.
Notice that the CAN channels are shown on the right side of the screen in the CHANNEL LIST. A nice fea-
ture is that the channels contained within each message are collapsed into a group whose name is the same
as the message name: