Specifications
OWNER’S GUIDE INTERFACE CARDS | 18451
Every message has the Edit button which opens Transmit message setup form where all message proper-
ties and data can be set.
Two types of messages can be created. Button and Schedule.
Schedule messages will be send automatically in the same order they have in the list. After each message
there can be wait time which can be dened in Wait time column. After last message is sent the schedule
starts will the rst message again. The schedule is created and scheduled messages start to transmit after
you leave the tab by entering some other tab or entering the measure mode.
Button messages are never sent automatically. You get a button to send them manually. In setup mode the
button for each Button message is on the table, and in Measure mode you get the special window with but-
tons for all that messages.
Storing ARINC/1553 data
ARINC and 1553 channels pressed in as USED on the setup screen will be stored into the data le when
you store data. It does not matter if the channels are shown on a display screen or not.
Processing ARINC/1553 data in MATH
ARINC and 1553 channels can be used within your MATH channels just like any other channel.