Specifications

3-44 | OWNER’S GUIDE
Operation Guidelines
System Startup Protocol
DC powered systems (STANDARD)
The standard D310 runs from wide-ranging DC
power: 9-29 VDC. An AC/DC adapter is included
with your system.
To run the system from AC, connect the AC power
cord to AC mains and to the AC/DC adapter. Con-
nect the DC output cable that has a round LEMO
connector on it to the DC power input on the right
side of the D310.
Press then release the soft power switch on the
D310, and the system will boot up.
VGA output for
connecting external
monitor
Soft power switch
DC power input
(9~29 VDC)
If your D310 does not have a display, please con-
nect a standard VGA or XGA monitor to the VGA
connector on the right side of the system.