Specifications
18-436 | OWNER’S GUIDE
Maps directories
Select the directories, where you stored your maps. You can copy your maps into this directory, add indi-
vidual directories or remove unused directories from the box. Convert the maps to .jpg or .bmp format before
selecting them.
Timing settings
When you want to use the DEWE-CLOCK as high precision timing device for synchronized data acquisition,
you need to enable this in the Timing section (Settings > Hardware Settings > Timing).
Select “DEWESoft USB” from the Timing device dropdown menu.
DS-7 will automatically start searching for a connected device.
Input settings
Time source
Here you can select which input signal (GPS or IRIG) is used for the time source.
Code type
If IRIG mode is selected as time source, this dropdown menu denes the used code type (IRIG-A, IRIG-B or
IRIG-G).
Modulation
This selects the modulation type (AC or DC) of the IRIG input signal
Output settings
The checkbox “IRIG Out” enables the output of the internally generated IRIG signal on the BNC connector of
the DEWE-CLOCK.
Please note that only IRIG-B with DC modulation is supported as output signal.
Set to default