Specifications
OWNER’S GUIDE D310 | 343
Connecting the MOB-DISP-17 to your D310
Whether your D310 has a built-in display or not, you can still connect an external monitor to it. This could be
either a standard ofce type computer monitor, or the DEWETRON MOB-DISP-17.
The MOB-DISP-17 is a ruggedized mobile display that is designed to be installed inside vehicles. It has
suction cup mounting positions, as well as VESA 75 mounting holes for this purpose. The MOB-DISP-17
accepts a standard VGA or DVI interface, therefore it can be connected directly to the VGA output of the
D3PC. In addition, the MOB-DISP-17 can be POWERED by the 12VDC output on the rear panel of the
D3PC.
Finally, a USB 2.0 cable should be connected between the D310 and the MOB-DISP-17, to enable the dis-
play’s TOUCHSCREEN capabilities, and to activate the USB 2.0 convenience jacks that are located on the
mobile display.
The MOB-DISP-17 is the perfect addition to your DEWETRON system, especially when it will be used in a
mobile or challenging physical environment. For complete technical details about the MOB-DISP-17, please
refer to the section of this document, “MOB-DISP-17 Mobile Display” on page 10-266.
Red - 12 VDC power cable
Blue - USB 2.0 cable (A/B)
Green - VGA cable
(To the 12VDC output on the opposite
side of the D310 chassis)