Specifications

17-422 | OWNER’S GUIDE
ORION-0424-200
 4 simultaneous sampled channels, BNC connection
 Voltage or IEPE® mode (4 mA or 8 mA source)
 4 input ranges (from ±0.1 V to ±10 V)
 Input coupling DC or AC (0.15 Hz or 3.4 Hz)
 204.8 kS/s per channel
 24 bit resolution, anti-aliasing filter
 TEDS (IEEE 1451) sensor support
Model Overview
Model
Analog
chs
Max kS/s/
ch
Digital
input
chs
Digital
I/O
Ext clock
Ext.
trigger
Counter/
encoder
TTL
Counter/
Encoder
ADJ
CAN
BUS
ORION-0424-200 4 204.8 -- -- -- 1 -- 1 --
Top Level Specications
Parameter Specification
Number of analog input channels: 4, simultaneously sampled
Input configuration: Symmetric, differential or single ended
Resolution: 24 bit, nominal
Type of ADC: Delta-sigma
Sample rate: 204.8 kS/s/ch maximum
Input signal range: ±10V, ±2V, ±0.5V, ±0.1V peak
Input impedance (ground ref.):
Positive to negative input 1 MΩ each with 60 pF to GND
Over-voltage protection: ±30V on both positive and negative inputs
Alias-free bandwidth (passband):
1 kS/s ≤ fs ≤ 51.2 kS/s
51.2 kS/s < fs ≤ 102.4 kS/s
102.4 kS/s < fs ≤ 200 kS/s
DC (0 Hz) to 0.42 fs
DC (0 Hz) to 0.32 fs
DC (0 Hz) to 0.22 fs
Dimensions: 17.5 x 10.7 cm (6.9 x 4.2 in.) (not including connectors)
Form factor: Half length PCI card
Analog input connector: BNC
Counter input connector: DSUB 9-pin connector, male
Environmental: T.
OP
: 0 to 50°C, T.
STORE
: -20 to 70°C; RH: 10 to 90 %, non-condensing
For complete details, please see the detailed manual for this card, available as a separate document.