Specifications
15-400 | OWNER’S GUIDE
MDAQ-AAF4-5-Bx Filter card
MDAQ-AAF4-5-BE: Bessel characteristics
MDAQ-AAF4-5-BU: Butterworth characteristics
16 Channel 4th order low pass lter
5 selectable lters including bypass function
5 different cut off frequencies
Discrete low noise lter design
Independent lter settings for each channel
Direct control from MDAQ-xx Amplier series
MDAQ-AAF4-5-Bx specications
Parameter MDAQ-AAF4-5-Bx
Filter range (-3 dB):
version MDAQ-AAF4-5-BU
version MDAQ-AAF4-5-BU-S1
version MDAQ-AAF4-5-BU-S2
version MDAQ-AAF4-5-BE-S1
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, bypass
163 Hz, 500 Hz, 2.5 kHz, 10 kHz, bypass, bypass
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz, bypass
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz, bypass
other frequencies optionally available
Bypass bandwidth: > 700 kHz
Filter characteristics:
-BE model
-BU model
4-Pole Bessel
4-Pole Butterworth
Attenuation slope: 80 dB/decade (24 dB/octave)
Filter Accuracy: ±1.5 dB @ fc
DC gain: 1 (0 dB)
Offset error:
Max. 1 mV (typ <0.2 mV)
Max. 0.02% of range with MDAQ-BASE-5
Input voltage range: ±10 VPP
Channel separation @ 50 kHz: > 96 dB
CMR @ 50 Hz (@ 1 kHz): > 94 dB (> 80 dB)
Input configuration: Designed to work with MDAQ-BASE-5 mother board
Output configuration: Single-ended
S/NR @ bandwidth: > 100 dB
Output impedance: 5 Ω
Output current: 20 mA max.
Output connector: 68-pin Amplimite series (AMP Nr. 174339-6), SCSI II Type
Power supply: ±7.5 V to ±15 V direct via MDAQ-BASE
Power consumption: typ. 3 W
Dimensions: 175 x 61 x 14 mm (6.9 x 2.4 x 0.9 in.)