Specifications

OWNER’S GUIDE  CONDITIONERS, MDAQ | 15399
MDAQ-FILT-5-Bx Filter card
MDAQ-FILT-5-BE: Bessel characteristics
MDAQ-FILT-5-BU: Butterworth characteristics
16 Channel 2nd order low pass lter
5 selectable lters including bypass function
5 different cut off frequencies
Discrete low noise lter design
Independent lter settings for each channel
Direct control from MDAQ-xx Amplier series
MDAQ-FILT-5-Bx specications
Parameter MDAQ-FILT-5-Bx
Filter range (-3 dB):
Version MDAQ-FILT-5-BU
Version MDAQ-FILT-5-BE
Version MDAQ-FILT-5-BU-S1
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, bypass
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, bypass
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, bypass
other frequencies optionally available
Bypass bandwidth: > 700 kHz
Filter characteristics:
-BE model
-BU model
2-Pole Bessel
2-Pole Butterworth
Attenuation slope: 40 dB/decade (12 dB/octave)
Filter Accuracy: ±1.5 dB @ fc
DC gain: 1 (0 dB)
Offset error:
Max. 1 mV (typ <0.2 mV)
Max. 0.02% of range with MDAQ-BASE-5
Input voltage range: ±10 VPP
Channel separation @ 50 kHz: > 96 dB
CMR @ 50 Hz (@ 1 kHz): > 94 dB (> 80 dB)
Input configuration: Designed to work with MDAQ-BASE-5 mother board
Output configuration: Single-ended
S/NR @ bandwidth: > 100 dB
Output impedance: 5 Ω
Output current: 20 mA max.
Output connector: 68-pin Amplimite series (AMP Nr. 174339-6), SCSI II Type
Power supply: ±7.5 V to ±15 V direct via MDAQ-BASE
Power consumption: typ. 3 W
Dimensions: 175 x 61 x 14 mm (6.9 x 2.4 x 0.9 in.)