Specifications

15-392 | OWNER’S GUIDE
Parameter MDAQ-SUB-V200
Power supply: ±15 VDC
Power consumption: typ. 4.5 W / 10 W
Sensor connection:
-BNC: BNC connector, female
-D: 9-pin DSUB connector, female
TEDS support: Yes (-D model only!), compatible with chips DS2406, DS2430A, DS2432, DS2433
Standard operating temperature: 0 °C to 70 °C (32 °F to 158 °F)
1) Applies to the MDAQ-SUB-V-200-D model only (DSUB connector)
Module Pin-outs (all 8 inputs are the same)
MDAQ-SUB-V-200-BNC version
MDAQ-SUB-V-200-D version
⇒ If signals above 60 V may appear, don’t use the
metal housing of SUBD connector.
⇒ Note - for safety reasons, refer to your
local/government regulations about the
maximum voltage that may be applied to
BNC or DSUB connectors!
PIN
DSUB-9 connector
MDAQ-SUB-V-200-D module (typ x 8)
1 TEDS
2 IN+
3 Reserved
4 GND
5 +15V sensor supply
6 0 - 12VDC sensor supply (software programmable)
7 IN-
8 Reserved
9 -15V sensor supply
Hot: IN+
Shield: IN-
See table >