Specifications

15-386 | OWNER’S GUIDE
⇒ CAUTION: If the excitation is not used for sensor supply it has to be deactivated by setting it to 0 V.
Sensor with 15VDC supply, and voltage output
Why More Wires are Better...
Sensitivity: For sensor wiring typically copper cables are used. For example a 120 Ω full bridge connected
with four 0.14 mm2 cables will have an sensitivity error of 2.1 % due to the 1.27 Ω wire resistance. But with
6-wire technology this can be completely compensated!
Temperature drift:
Intial error Drift after 10°C warm up
Offset Sensitivity Offset Sensitivity
2-wire 25183 μm/m -4.97 % 956 μm/m -0.18 %
3-wire 0 μm/m -2.6 % 0 μm/m -0.01 %
4-wire 0 μm/m 0.0 % 0 μm/m 0.00 %