Specifications

OWNER’S GUIDE  CONDITIONERS, MDAQ | 15381
Module
Chs
Input type
Ranges
TEDS
Bandwidth
High-pass
Filter
Excitation
MDAQ-SUB-STG-D
Connector: DB9
8
Strain gage (full, half, and
1/4 bridge, incl. shunt cal
and balance) for strain gage
applications
14 ranges from ±0.5 to 1000 mV/V
(@ 5V excitation)
√
BW: 30 kHz
HF: --
EX: 0 to 12 VDC
Voltage up to ±10V 15 ranges from ±2.5 V to ±10 V
IEPE via MSI-BR-ACC 7 ranges from ±0.25 mV to ±10V
Voltage via MSI-BR-V200 6 ranges from ±10 to ±200 V
Thermocouples via MSI-BR-
TH-J, -K, -T
Full range of thermocouple type
RTD via MSI-BR-RTD -200° to 1000°C, and 0 to 6.5 kΩ
MDAQ-SUB-BRIDGE-D
Connector: DB9
8
Strain gage (full and half
bridge) for strain gage
sensors
14 ranges from ±0.5 to 1000 mV/V
(@ 5V excitation)
√
BW: 30 kHz
HF: 0.16 Hz
EX: 0 to 12 VDC
EX: ±15 VDC
Voltage up to ±10V 15 ranges from ±2.5 V to ±10 V
IEPE via MSI-BR-ACC 7 ranges from ±0.25 mV to ±10V
Voltage via MSI-BR-V200 6 ranges from ±10 to ±200 V
Thermocouples via MSI-BR-
TH series
Full range of thermocouple type
RTD via MSI-BR-RTD -200° to 1000°C, and 0 to 6.5 kΩ
MDAQ-SUB-V200-D
Connector: DB9
8
Voltage up to ±200V 13 ranges from ±0.125 to ±200 V
2)
√
BW: 300 kHz
EX: 0 to 12 VDC
EX: ±15 VDC
IEPE via MSI-BR-ACC 7 ranges from ±0.25 mV to ±10V
RTD via MSI-BR-RTD -200° to 1000°C, and 0 to 6.5 kΩ
MDAQ-SUB-V200-BNC
Connector: BNC
8 Voltage up to ±200V 13 ranges from ±0.125 to ±200 V --
BW: 300 kHz
HF: --
EX: --
MDAQ-SUB-ACC-BNC
Connector: BNC
8 IEPE or voltage up to ±10V 8 ranges from ±125 mV to ±10 V √
BW: 300 kHz
HF: 0.16 Hz
EX: 4/8 mA
MDAQ-SUB-ACC-A-BNC
Connector: BNC
(same image as above)
8 IEPE or voltage up to ±10V 8 ranges from ±125 mV to ±10 V √
BW: 300 kHz
HP: 0.16 and
3.4 Hz
EX: 4/8 mA
- 1) When excitation is chosen on any channel of an MDAQ-SUB module, it is the same for all 8 channels of that module.
⇒ 2) We recommend not exceeding 50Vrms on the DSUB input connector for safety reasons
V
MSI
V
V
V
MSI
MSI
MSI
MSI
MSI
MSI
MSI