Specifications

15-380 | OWNER’S GUIDE
MDAQ-BASE-5 Mother Board
Every MDAQ assembly consists of a 16-channel MDAQ-BASE mother board and at least one MDAQ-SUB series 8-channel
daughter card. Each MDAQ-BASE card can accept any two MDAQ-SUB cards, which are mounted next to each other on one
side of the MDAQ-BASE. The other side of the MDAQ-BASE can accept any single Dewetron MDAQ-FILT series 16-channel
filter card.
MDAQ-BASE-5 Details
The MDAQ assembly is factory installed according to your purchase order. Unlike DAQ modules, which can be freely plugged/
unplugged by the system user, MDAQ assemblies are not user-exchangeable. When your system is constructed at Dewetron, the
MDAQ assembly will be completely installed and tested.
MDAQ-SUB module dimensions:
Modules with BNC connectors: 175 x 61 x 30 mm (6.9 x 2.4 x 1.2 in.)
Modules with DSUB connectors: 175 x 82 x 22 (6.9 x 3.2 x 0.9)
MDAQ-SUB output connector (for MDAQ-BASE mother board)
68-pin amplimite series (AMP Nr. 174339-6)
TOP: MDAQ-SUB DAUGHTER cARDS (2)
MIDDLE: MDAQ-BASE MOTHER BOARD
BOTTOM: MDAQ-FILT cARD (OPTIOnAL)